Unreasonable braiding angles of shields that control the outer diameter of the cable can cause breakage of the shield. As a result, the shielding effect is weakened, and the jacket is worn or damaged. Any internal structural defects are difficult to detect from the outside, but the problem of the jacket can be directly observed by the naked eye. The sheath is the first layer of protection of the internal structure of the cable. This is why cracked, worn, and deformed sheaths are very serious quality problems. To avoid such problems, manufacturing processes and materials are important factors in determining product quality.
The sheath ensures that the core does not loosen when the cable is in motion. The reason is that the jacket is extruded with a particularly large pressure. It acts like a guide groove, guiding the movement of the core and also supporting it.
Summarize the cable quality assurance: center to stress design; multi-bundle cable structure; shielded cable in the use of armor-type extrusion of the inner sheath; fully shielded insulated braided mesh; optimized braided braiding angle; Sheath. The control shielded cable produced in this way ensures quality compliance. Kuan
Semi Automatic Blister Vacuum Forming Machine
1) The machine is automatic,person just need put the material on the machine,others functions can be down automatically.
2) One people can operate several machine,greaqtly save the people cost.
3) The far-infrared ceramic heating elements can control every single block heater temperature,more power-saving features,and reducing production cost.
4) The cooling system is independent by cold wind.
5) The machine can form all kinds of blister just replace the mould.
Dental Vacuum Forming Machine,Semi Automatic Blister Vacuum Forming Machine,Semi Automatic Vacuum Thermoforming Machine,Vacuum Blister Forming Machine
Hangzhou Xiaoshan Wanfeng Mechanical & Electrical Equipment Factory , https://www.wanfengmachinery.com