The most prominent feature of the compact garbage truck is that it can compress and compact the garbage, which is equivalent to a small compressed garbage station, and can have enough large "appetite" to carry enough pressure. People often call it "the king of the big stomach," and its "appetite" is three to four times that of regular garbage trucks. Therefore, it is deeply loved by new and old customers.
Well, today here, Xiao Bian gave you an introduction on how to properly use compressed garbage trucks:
1. Operate the electric control button or hydraulic control handle, retract the push plate cylinder, push the slide cylinder to the maximum stroke, push the squeegee to the maximum stroke, and push the slide plate and the squeegee in the position as shown in the figure. Keep the control handle of the reversing bucket down and hold it down so that the reversing bucket moves down to the ground. Push the wheel axis of the garbage into the wheel fork and push the front end of the garbage truck on the triangle to prevent the front of the garbage truck from falling to the ground.
2. Control the retraction of the scraper cylinder to make the scraper evasive to the maximum position and control the retraction of the slide cylinder to lower the slide to the lowest position.
3. Open the baffle on the front of the garbage cart and operate the control handle or electric control button of the reversing bucket so that the reversing bucket and hand push the garbage truck up and keep the uniform speed, unload the garbage in the press pack warehouse, and then operate the reversing bucket control handle to Underneath it is not loose, so that the flip bucket and hand push the garbage truck down together and keep a constant speed, pull out the hand to push the garbage truck.
4. Control the extension of the squeegee cylinder to the maximum position to allow the squeegee to scrape clockwise to the maximum angle. Note: If the rubbish in the bucket body causes the scraper to scrape the rubbish clockwise, it may be necessary to scrape the garbage at a small angle several times before sweeping the entire angle. Control the slide cylinder to extend so that the slide moves to the highest position.
5, continuous cycle of operation steps 2-4 to complete the disposal of all garbage. Operate the skip to the closed position, and in the cab, step on the clutch. Press the power take off switch to disconnect it. Drive to the next garbage collection point.
6, the technical characteristics of the chassis and use, maintenance, see its corresponding truck loading instructions. Only by familiarizing yourself with the vehicle structure and strictly implementing the various maintenance requirements of the operating instructions can you ensure the normal operation and the service life of the vehicle; therefore, please read the operating instructions carefully before use.
Lift Gate Lock For Honda,Trunk Lock Actuator For Honda,Tailgate Lock For Honda,Trunk Tailgate Lock
RUIAN GLEEFUL AUTO PARTS CO., LTD. , https://www.rpc-gleeful.com