The Wuhan Economic and Technological Development Zone, which has built six, is under construction, and has gathered seven major vehicle manufacturers, has finally ushered in the establishment of the automobile core component plant. On October 23, 2013, the establishment and foundation laying ceremony of the East Style Traktor Transmission Co., Ltd. (hereinafter referred to as “Eastern Trakâ€) was held in the district, which was also the first automobile core component project introduced by Wuhan City.
Dongfeng Powertrain Construction Substantially Breakthrough
On October 22nd, 2012, Dongfeng Motor Group Co., Ltd. and GETRAG International Co., Ltd. of Germany signed a joint venture contract and a joint agreement for the development of the Low Torque Double Clutch Transmission (DCT), and decided to set up a joint research and development of automobile transmissions in Han. Dong-style Traktor Transmission Co., Ltd., which integrates manufacturing and sales functions.
Zhu Fushou, General Manager of Dongfeng Group, said at the groundbreaking ceremony that the establishment of the joint venture company marked a substantial move in the construction of Dongfeng Powertrain. It is also important for Dongfeng to gather global resources, speed up the construction of independent powertrain, and cultivate independent innovation capabilities. Initiatives.
It is reported that the total investment in the first phase of the plant is 120 million euros, and the annual production capacity of a 250,000 gearboxes will be designed. It is estimated that the first quarter of 2016 will be completed and put into production, and will eventually be built to an annual output of 1 million units of transmission.
Complete the short board to improve the industrial chain
This is good news for the Wuhan Economic and Technological Development Zone, which is currently not equipped with automotive core components, and even Wuhan City. Heavy trucks and light parts are almost the "common problem" of the entire Chinese automobile industry.
In 2011, the China Automotive Engineering Research Institute released a report saying that core components such as engines and gasoline turbochargers are almost exclusively monopolized by international brands.
At present, Wuhan Development Zone has more than 200 auto parts companies, ranking among the top 20 auto parts suppliers in the world, and half of them have investment in Wuhan Development Zone, but there are almost no auto parts and components. While this project breaks this vicious circle, it also further perfects the automotive industry chain.
At the foundation laying ceremony, Zhu Yi, member of the Standing Committee of the Wuhan Municipal Party Committee and Secretary of the Wuhan Development Zone Working Committee, said that the East-style Trak is an important measure to cultivate first-rate independent innovation capabilities, and will further enhance the R&D and production capabilities of the core automotive parts and components in the region. Assisted the development zone to speed up the implementation of the industrial doubling plan.
According to Wuhan City’s recent announcement of the "Industrial Plan for the Construction of Wuhan's Key Industrial Chains", it is clearly stated that in the next three years, it will focus on building the top ten industrial chains represented by auto parts. By 2016, the output value of auto parts will exceed 200 billion yuan. .
RS30C Rotor Spinning Machine-A new generation of semi-automatic spinning machines with fine quality, high efficiency and wide adaptability of raw material
a The new generation of Spinning Machine improves the quality of the obtained yarn and the adaptability of its raw material is wide.
1 The design of fiber channel is optimized to achieve better evenness and higher strength for the obtained yarn with less defects; especially when the spinning the non-cotton fiber the friction coefficient of which is big, the fiber transfers smoothly and the quality of the obtained yarn is improved;
2 The new carding and inclusions removing system can adapt to worse raw materials to reduce the production cost.
b The YOUYI jointing system with excellent jointing quality and ease of operation
1 The pneumatic controlled semi-automatic jointing system can automatically lift the bobbin in case of yarn breakage;
2 In the process of jointing, the doffing roller is depressed under the force of cylinder pressure and the yarn cone is put down to ensure the consistency of the jointing operation;
3 The concept of automatic jointing is introduced and the stepper motor is applied to control the feeding, thus the jointing quality is improved;
4 When the preparation work for jointing is done, the specially designed yarn breakage sensor would sense the feeding of yarn and automatically start the jointing. C
c Lower production cost, higher productivity
1 Max can up to 480 rotors per machine;
2 When the speed of the rotor reaches 105,000 rpm, the servo would drive the traverse yarn guiding and the yarn guiding speed reaches200m/min;
3 The whole machine is driven via variable frequency and both sides transmit independently to reduce the assistant production time;
4 Low operating height and can be equipped with cans up to1200mmhigh.
Machine Parameter:
1,Machine Length : ≤62.5m, up to 480 heads, 20 heads in each section, spindle pitch:230mm
2, Yarn Count Range: 6--40Ne
3, Spinning Material : ≤60mmnatural and artificial fiber and blended yarn
4,False Twister :R7/R4 smooth metal, ceramic plain and incense-oiled and other specifications
5,Navel: Ceramic plain, V groove and spiral groove
6,Rotor Speed : 45000-105000 two sides independent transmission, variable frequency adjusted
7,Rotor Rotating Speed Difference Rate: ≤3%
8,Rotor Diameter: Ф33 /36 / 42 / 50 /54 / 66 or other models
9, Carding Roller Speed:6000-11000 two sides independent transmission, variable frequency adjusted
10, Hard Edge Stroke :0~4 Step-less regulation
11, Parallel Bobbin Cop Models: 30°,33°,35°,39°or 42°
12, Can Model (Outside Diameter/Height):16″(Ф400 ), 18″(Ф450),20″(Ф530) /standard height: 1070, 1200 optional
13,Package Model (Diameter): Parallel Bobbin Maximum: Ф300
Conic
Bobbin Maximum: Ф270
14,Full Bobbin Yarn Weight: Max 4.5KGS
15, Arm Lifting Device :Standard pneumatic automatic lifting
16, Rotor Cavity Negative Pressure:≥5kpa
17, Suction Fan Displacement: Maximum:7200m3/h , variable frequency adjusted
RIFA major manufacture all kinds rotor spining, OE machine, Twister machines, winding machines, compact conversion, knitting machines and all kinds looms.
Semi-automatic Rotor Spinning Machine
Semi-Automatic Rotor Spinning Machine,Rotor Spinning Machine,Rotor Spinning Machine For Cotton,Cotton Spinning Machine
RIFA TEXTILE MACHINERY CO.,LTD , http://www.rifatex.com