Ministry of Agriculture Ministry of Finance jointly issued a drying facility subsidy standard of 30%

China Drying Network Currently, the Ministry of Agriculture and the Ministry of Finance jointly issued the Notice on Doing a Good Job in the Initial Processing of Agricultural Products in 2014. Among them, the subsidy standard for drying facilities is 30%, which will greatly promote the application and expansion of heat pump drying, and will also promote the subsequent high-speed development of air-energy heat pumps.

The difference between the heat pump dehumidifying drying and the traditional hot air drying is that the air circulation mode is different, and the way of dehumidifying the air in the drying room is also different. When the heat pump dries, the air is closed in a closed cycle between the drying chamber and the heat pump dryer. It uses the refrigeration system of the heat pump drier to cool and dehumidify the wet air from the drying chamber. When the moist air flows through the heat pump evaporator, the internal low pressure refrigeration The heat absorbed by the agent from the air changes from a liquid state to a gaseous state, and the air discharges most of the condensed water due to cooling. The low-pressure refrigerant vapor from the evaporator is boosted by the compressor and sent to the condenser. When the dehumidified dry cold air flows through the condenser, the internal high-pressure refrigerant releases heat due to condensation, and the external air is heated to hot air and returned to the drying room to continue drying the product to be dried. The high-pressure refrigerant discharged from the condenser is depressurized by the expansion valve and flows into the evaporator for the next cycle.

Air-energy heat pumps are widely used at this stage: tobacco drying, drying of fruits and vegetables, drying of medicinal materials, drying of seafood, drying of wax products, and drying of betel nuts. Compared with traditional drying, air-dried products have higher quality, are more energy-efficient, and are more environmentally friendly. And the introduction of documents for the subsequent development of air energy will be a qualitative change.

FantasView Truck and Bus Wiper Blades are all with original adaptors, they can fit most of bus & truck around the world.

They can use for CAERANO CARVIN (I) CITROEN DAF DEN OUDSTEN DODGE EBRO(MOTOR IBERICA) ERF FODEN FORD IVECO(OM) JONCKHEERE KASSBOHRER KASSBOHRER (SETRA) MERCEDES-BENZ OBRADORS ORENSTEIN U.KOPPEL PEGASO SMIT STEYR TAM VAN HOOL VOLKSWAGEN VOLVO

Size available: 500MM, 550MM, 600MM, 650MM, 700MM, 800MM, 900MM, 1000MM


  • Direct fit ensures trouble-free installation
  • Long-lasting enamel paint prevents flaking, peeling and fading
  • High-tensile strength spring rate maintains proper wiper blade to glass contact


Truck And Bus Wiper Blades

Truck And Bus Wiper Blades,Heavy Duty Truck Wiper Blades,Truck Windshield Wiper Blades,Heavy Duty Wiper Blades

NINGBO FANTASVIEW WIPER BLADES CO., LTD. , http://www.fantasview.com

Posted on