In life, many people do not know how to identify the good and bad LED energy-saving lamps, which brings some misunderstandings to the selection of LED energy-saving lamps.
A look at the packaging and trademarks state mandatory LED lighting manufacturers products on the outer packaging marked the following: rated voltage, voltage range, rated power, rated frequency.
Generally speaking, the quality of the trademark printing of high-quality products is good, the font is clear, it is not easy to fall off, and it is wiped with a soft damp cloth. The mark is clear and identifiable, it is not easy to wipe off, and there are trademarks of manufacturers and related certification marks. Counterfeit products have poor printing quality, fuzzy fonts, easy to erase, no manufacturer's trademark and related certification marks.
Second, look at the LED lamp tube appearance of the real LED energy-saving lamps, is to use three primary color tubes, tube white, cover by hand to see, whiter. In addition, from the perspective of the lamp tube, it is possible to compare a plurality of lamps together, and the shape and size consistency of the lamp tube are mostly bent and formed by a machine, and most of them are products produced on a large scale. The consistency of the product is good, the quality is easy to be guaranteed, and the interchangeability during maintenance is better. Of course, there should be no cracks, looseness, and traces between the interfaces. During the installation and disassembly process, the lamp cap should not be loose or smashed. The plastic shell of the lamp must be selected from the flame retardant type of engineering plastic. Ordinary plastics are easily deformed and flammable, and are prohibited from being used in the production of energy-saving lamps. The two can be easily discriminated from the surface. The latter surface is smooth and shiny, and the surface of the former has a texture similar to frosted glass.
Third, look at the temperature of the work LED energy-saving lamps under normal working conditions, the temperature rise should be very low. Otherwise, the LED energy saving lamp has a very short life. At the same time, when the energy-saving lamp is lit, there is a rapid flashing, or it is very glaring, indicating that the energy-saving lamp has quality problems.
Four look at the startup performance LED energy-saving lamp startup has two characteristics: First, the higher the temperature, the easier it is to start; the second is that the light is turned off and will not flash. In addition, it is worth mentioning that many LEDs
The energy-saving lamp is very dark, which is unfavorable for the life of the lamp. The LED energy-saving lamp should be provided with a power circuit and a PCB board inside.
Five look at the interference situation In China, electromagnetic compatibility is a project that must be passed by electrical appliances. However, the detection of this project is very complicated. When users buy lamps, they will see whether there is a mark on the packaging that passes the national electromagnetic compatibility test. Short-wave radio, when the lamp is working, put the radio nearby, the lower the noise emitted by the short-wave radio station, the better the electromagnetic compatibility of the lamp under test.
Destoner Machine is used to remove sand, stones, metals from good grain , seed, beans. It is also called Dry Stoner, Stone Removing Machine.
Its working principle is based on gravity weight, to remove heavier impurities from good materials.
The working process is : when seed flow into vibration deck/sieve, with the combined work of vibration and air blowing, the heavier materials and lighter materials will separate in different layers and discharge from different outlet.
We have Air Blowing Type Destoner and Air Suction type Destoner, which will be used for different usage.
The Air Blowing type is 5XQS series destoner, it is a universal Destoner Machine, which can be used for wide range of seed, grain and beans, it has wide processing table with stronger air volume, better for processing all kinds of beans and materials who has lot of stones.
The Air Suction type we have TQSF series destoner and QSX-85 Destoner. They are often used for small granule materials, such as wheat, maize, cumin, paddy etc. their air volume is small, so when processing beans, results not much good.
Our Destoner Machine can be used for all kinds of seed, grain, beans, such as wheat, maize, rice, paddy, sesame, red beans, chickpea beans, soybeans, sunflower seed etc.
We also provide extra table or different
sieves to process different materials.
Model
Capacity(t/h)
Power(kw)
Weight(kg)
Dimension(mm)
5XQS-3
3
5.5
600
1800X1300X1600
5XQS-5
5
7
700
2500X1560X1600
5XQS-10
10
9.7
800
2500X1680X1600
TQSF-60
5
3.5
320
1350X860X1800
TQSF-80
7.5
4.5
430
1350X1050X1800
TQSF-100
10
6.24
480
1400X1250X1920
TQSF-125
12.5
6.24
580
1460X1500X1940
QSX-85
5
3.55
400
1300X1500X3200
FAQ:
1. How about payment terms?
Usually is 30%TT in advance, balance 70%TT before shipment. We also accept L/C at sight, Paypal, West Union, Money Gram etc.
2. How long is the delivery time?
15 days after payment
3. How about packaging?
We will pack machine into plywood box if ship by LCL. If ship by FCL, we will coat machine with plastic film and fixed well by belt fastener, strong iron wire and steel wedge etc.
4. Is there any warranty?
Warranty is 1 year.
5. Installation and commission?
We can send engineer to help installation and commissioning, but you should pay for visa, air tickets, salary and arrange food and hotel when our engineer in your country.
6. Do you have some videos that will help us on assemble or run the machines?
Yes, we have videos on how to assemble and use our machines, will send you a CD when ship the machine to you.
Destoner Machine,Rice Seed Destoner,Wheat Destoner,Stone Removing Machine
SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , https://www.seedgraincleaner.com