Beijing needs or receives polluting congestion fees as the situation requires

Beijing needs or receives polluting congestion fees as the situation requires In accordance with the requirements of the "Beijing Municipal Clean Air Action Plan (2013-2017) Key Tasks Decomposition Measures" (hereinafter referred to as the "task resolution"), the Municipal Communications Commission and the Municipal Environmental Protection Bureau are stepping up efforts to study and formulate policies and programs for low-emission zones and sewage congestion fees. . In the formulation of policy research, the opinions of all sectors of the society will be widely solicited. After fully improving, the government will consider the need for air pollution control in Beijing and publish this policy in due course.

It is understood that the low-emission zone and sewage congestion charging policy is one of a series of measures for Beijing to thoroughly control air pollution. In recent years, the problem of high-intensity use, high-density accumulation, and high-speed growth of motor vehicles in Beijing has caused serious problems. As a result, the severity of vehicle exhaust pollution has intensified, and the pressure on road traffic has increased. According to the monitoring data released by the Municipal Environmental Protection Bureau last year, the emissions of nitrogen oxides and volatile organic compounds from motor vehicles accounted for 58% and 40% of the city's total emissions. PM2.5 emissions from motor vehicle emissions accounted for about 22.2 of PM2.5 sources. %. Therefore, the structural adjustment and emission reduction of motor vehicles is an important task in the Clean Air Action Plan. The goal is to reduce the total amount of vehicle fuel in 2017 by more than 5% from 2012. In addition, the speed of the Ministry of Environmental Protection light gasoline vehicles as an example: the average speed of petrol passenger cars increased from 25km / h to 30km / h, CO, HC, Nox emissions will be reduced by 15.6%, 16.5%, 14.7%.

According to reports, in respect of air pollution control and prevention, some foreign large cities such as London, Singapore, Stockholm, and Milan have implemented low-emission zones and congestion charging policies, which have had the desired effect of reducing air pollution and alleviating traffic congestion. In the next step, we will use foreign experience to analyze data on road traffic operation and tail gas pollution monitoring in Beijing, and conduct in-depth research on policy programs and technical support measures suitable for the characteristics of the city. We will fully demonstrate the necessity and expected results and widely solicit opinions from all sectors of society. After a well-developed plan has been formed, it will be issued in accordance with the needs of atmospheric environmental governance in order to achieve the comprehensive goal of preventing and controlling exhaust pollution and alleviating traffic congestion.

At the same time, Beijing will also vigorously develop public transport and continuously increase the proportion of intensive travel; appropriately expand the scope of differential parking fees, and guide the use of vehicles in central cities; and vigorously upgrade new energy vehicles and clean energy vehicles in the city’s traffic vehicles. The proportion of efforts to reduce motor vehicle pollution emissions.

The publication of the “Decomposition of Tasks” signifies that the capital transportation has entered a new stage of development, that is, a combination of improving people’s livelihood, governance and pollution control, and taking a “safe, convenient, and green” sustainable development path. This process requires the government, business, and the general public to breathe together, share responsibility, and participate.

PP Plastic Rod

PP plastic, polypropylene, commonly known as "baijiao",Scientific name: polypropylene.

Description:

PP Plastic is a kind of semi crystalline material. It is more hard than PE and has a higher melting point. Due to the high crystallinity, the surface of the material stiffness and resistance to scratch characteristics very well. PP Plastic don't have the problem of environmental stress cracking.Polypropylene (PP Plastic) is a semi-crystalline thermoplastic.PP Plastichas high impact resistance, strong mechanical properties, resistance to many organic solvents and acid and alkali corrosion.

PP Plastic is widely used in industry and is one of the most common polymer materials.

Australian COINS are also made of polypropylene.

Polypropylene bonding:

K-720 is suitable for polypropylene PP plastic adhesion, suitable for large area plate lamination, high transparency, suitable for PP adhesion PP, PP adhesive PC, PP adhesive ABS,PP adhesive PVC, PP adhesive acrylic, PP sticky metal, PP stick wood.

K-7007 adhesion performance is roughly the same as k-720, light yellow and more economical.

K-620 is adhesive small area polypropylene PP glue, must be used with the k-650 treatment agent, the instant positioning, the strength is high.

Extruded Polypropylene Plastic Pp Rod

Advantages:

1. Low density;

2. Heat resistance ;

3. Non deformation;

4. High stiffness;

5. High surface strength;

6. Good chemical stability;

7. Nontoxic and safe.

Disadvantage:

The main disadvantage of the fault polypropylene is that the high temperature rigidity is not enough, and the low temperature is brittle.

Poor environmental tolerance, outdoor use, easy to turn yellow and brittle.

Tensile strength of anisotropy, the products are easy to deform, continuous use of low temperature, high creep performance, and long - term load.

Poor printing performance.

Application:

1,Valve part, drinking water and sewage water pipe,

2,Sealing element, spraying carrier,

3,Corrosion-resistant trough and barrel, industrial applications that have acid and alkali-resistant requirement; wastewater and gas discharge equipment for industrial purpose,

4,Scrubbing tower, clean room, semiconductor plant and other related industrial equipment and machinery, food machinery and chopping board,

5,Electroplating process, toy part

Gray Pp Plastic Rod


Combustion characteristics: PP Plastic easy to burn, polypropylene from continue to burn after the fire, with the top of the flame is yellow, the bottom made in blue, with a small amount of smoke generated, burning melt dripping, and oil.

Specification: the thickness of PP sheet material can be produced from 0.3mm to 2mm, and the PP sheet material is of rolling material and width of 500-1000mm.

The thickness of the plate can be produced from 2mm to 200mm. The specification is 600*1200mm 1000*1000mm 1000* 2000mm. Other specifications can be customized as needed,and The diameter of the PP rod can be produced from 2mm to 250mm, the length is 1 meter, PP rod can be ordered to be more than 3 meters in length.

Color: white and black, other colors can be customized

Modified varieties: PP sheet have various enhancers and other auxiliaries can be added to make modified varieties, depending on the requirements

Rod

Storage methods:

Keep in tight, cool and dry place to ensure good ventilation

Product certification: most environmental certification reports and safety reports for raw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.

Pp Plastic Rod,Polypropylene Plastic Rod,Extruded Polypropylene Plastic Rod,Pp Plastic Welding Rods

Dongguan Noegem Plastic Products Co.,Ltd , https://www.noegempLastic.com

Posted on