- Model NO.: YX312
- Certification: CE
- Condition: New
- Automatic Grade: Automatic
- Machine Size: L*W*H=12m*1.2m*1.2m
- Machine Color: Blue or According to Your Requirement
- Material Effective Width: 315mm
- Material Length: Input The Length in PLC
- Control System: PLC
- Transport Package: Normal
- Origin: Shanghai
- Warranty: 2 Years
- Customized: Customized
- Control Type: PLC Control
- Name: Crash Barrier 2 Waves Guardrail Roll Forming Machi
- Machine Weight: 8 Tons
- Delivery Time: 55 Days
- Machine Thickness: 1-3mm
- Life Long: 10years
- Trademark: Aofa
- Specification: SGS
- HS Code: 84552210
Highway guardrail roll forming machine
Guardrail roll forming machine
Roll forming machine
PLC control touch screen operation
Hydraulic press for punching
High quality competitive price
Forming processing
Uncoiler--- flatting --- punch --- fast feeding --- opto-electrical cutting --- forming --- alignment device --- collection --- controller --- forming moulds
Unit performance:
1, Total power of equipment is 90kw
2, Maximum height of profiles formed: 85mm
3, Maximum thickness: 4.0mm
4, Maximum forming speed: 15m/min
5, The welding machine body structure must conform to the requirement, the welding must conform to the national welding standard.
6, The equipment after antirust processing, brush antirust paint first, the antirust paint must cover comprehensively, then brush the high quality finish paint. The movable part shows the different color for caution.
Equipment parameter:
1 De-coiler
1) The un-coiler with bipyramid and tension power,
2 Loading 8T. Inner diameter of coil: φ 508mm,
3) Maximum diameter of coil: φ 2000mm,
4) Power of tension power: 2.2kw,
2, Flatting machine
1) The wall plate type seven roller flatter, two rollers clamp deliver, five rollers for leveling.
2) Power: 7.5kw,
3, Punching machine
1) Using type Yl32-315 4Â pillar hydraulic pressure puching machine,
2) Hydraulic pressure power: 22kw.
3) Material of blade mould &Â plunger chip is alloy steel Cr12MOV.
4, Fast feeding
1 Initiative delivers.
2 The power disposition is the 2.2KW.
3 The reductor is ZQ250.
5, Opto-electrical Cutting device
6, Forming machine:
1) Forming racks: 12sets
2) Cast iron torri type
3) Width of machine: 550mm
4) Material of torri is HT200, tempering
5) Double axis transmission gear box 1set, under the axis transmission gear box 10set, bevel gear modulus M=9, material of gear box is only HT200.
6) Power of main machine: 55kw, transducer speed governor. ZQ650, reductor, speed ratio: 48.57, Between the transmission gear box uses 1Â inch double chain drive; Connects with the rotary drive shaft between rollers, rotary drive shaft model 140-275; Uses 1.5 inch double chain drives with the speed reducer;
7, Collection table
8, Control system
Production line uses PLC controller, opto-electrical device control cutting. But manual and automatic control whole production line for each part coordination.
9, Forming mould:
Material is GCr15. Whole quenching hardness is HRC55 º ~60
Components
decoiler | 1 set |
guiding and leveling device | 1 set |
forming machine | 1 set |
punching device | 1 set |
cutting device | 1 set |
electric controll system | 1 set |
output table | 1 set |
 driven device--gear box | 1 set |
Contact:
Abby Song
Â
MOB:+86-18701854523
Website:http://shaofa.en.alibaba.com
        http://www.shafjx.com
CHANGLIN brand Pneumatic Rubber Fender is one of the Jinan Changlin's major products. It has the merits of high pressure resistance, high energy absorption, low reaction force, aging resistance and seawater corrosion resistance. during the standard preparation, compression performance tests were made by Shandong University Mechanical Engineering test center. Could be compare with Yokohama Type Fenders, our company also made the GB/T 21482-2008, The Reliable data proved that products quality performance parameter have reached or was high than the requirements international standard. At present, CHANGLIN brand Pneumatic Rubber Fenders were widely used to various ships, offshore platforms, wharfs and floating docks for collision protection at local and abroad.
The specifications and performance or CHANGLIN pneumatic rubber fender (Reaction force R and energy absorption GEA are guaranteed values at deflection (60±5)%D) |
||||||
Initial inner pressure =50 kPa |
Initial inner pressure =80 kPa |
|||||
R /kN |
GEA /kJ |
P /kPa |
R /kN |
GEA /kJ |
P /kPa |
|
1.0×1.5 |
182 |
32 |
122 |
239 |
45 |
160 |
1.0×2.0 |
257 |
45 |
132 |
338 |
63 |
174 |
1.2×2.0 |
297 |
63 |
126 |
390 |
88 |
166 |
1.35×3.5 |
427 |
102 |
130 |
561 |
142 |
710 |
1.5×3.0 |
579 |
153 |
132 |
761 |
214 |
174 |
1.7×3.0 |
639 |
191 |
128 |
840 |
287 |
168 |
2.0×3.5 |
875 |
308 |
128 |
1150 |
430 |
168 |
2.5×4.0 |
1381 |
663 |
137 |
1815 |
925 |
180 |
2.5×5.5 |
2019 |
943 |
148 |
2653 |
1317 |
195 |
3.0×4.0 |
1452 |
746 |
145 |
1887 |
1036 |
195 |
3.0×5.0 |
1815 |
965 |
148 |
2359 |
1341 |
198 |
3.0×6.0 |
2243 |
1184 |
152 |
2916 |
1646 |
203 |
3.3×4.5 |
1884 |
1175 |
130 |
2476 |
1640 |
171 |
3.3×6.0 |
2783 |
1675 |
141 |
3652 |
2338 |
195 |
3.3×6.5 |
3015 |
1814 |
146 |
3961 |
2532 |
191 |
Note: D is fender diameter; L is fender length; R is compressive reaction force, its allowance is ±10%; GEA is guaranteed energy absorption; P is inner pressure |
Pneumatic Rubber Fenders
Pneumatic Rubber Fenders,Pneumatic Ship Fenders,Pneumatic Rubber Fender,Pneumatic Rubber Bumper
Shandong Shine Machinery Co.,Ltd , http://www.jnclqnkq.com