The belt sludge dewatering machine developed and produced by Dacheng Environmental Protection Equipment Co., Ltd. of Xinxiang City, Henan Province has recently obtained a national utility model patent. The belt type sludge dewatering machine includes a frame, a working portion located in the frame, and a pressing portion located in the frame. In the pressing portion, there are three upper and middle squeezing rollers, and three squeezing rollers. Words are laid out, and each squeeze roller is mounted on the frame through the half shafts at the left and right ends. The two ends of the upper and lower squeeze rollers are installed in the radial slots of the frame. a cylinder connected to the upper and lower pressing cylinder drive roller axle at both ends of the rack moves along the radial slot down, the intermediate roller and a lower pressing surface of the pressing roller nozzle holes opened, the intermediate and the lower pressing roller pressed the right end of the roller axle is a hollow stationary axle, the axle is turned relative to the vacuum chamber, and a sprocket gear mounted on the intermediate roller is connected to the left axle, the product effectively improve the dewatering effect, the water content Between 70% and 75%, the cost of subsequent processing is effectively reduced.
CNC Cutting Fume Extraction Systems
Cnc Cutting Fume Extraction Systems,Cnc Cutting Fume Extractor,Cnc Cutting Smoke Extractor,Cnc Grinding Dust Collector
Jinan Moland Environmental Tech Co.,Ltd , https://www.sdmoland.com