Field management not only includes conventional fertilization and irrigation, but also pest control, and we all know that the current agriculture advocates quality improvement and green development, so the pest control methods have also undergone major changes, such as the past Pesticide lamps are toxic to kill insects, and nowadays, insecticidal lamps are widely used for physical insecticides. In the past, pests were detected after the occurrence of pests. Now, the insects are reported through automatic insect detection lamps , through prevention in advance, scientific prevention and control. Ways to reduce pest losses, and these scientific, green and environmentally friendly new methods of pest control have played a good role and effect in the actual production process.
The agricultural demonstration parks occupy an important guiding position in the agricultural development of various places. Therefore, it is very important to do the field management work of the agricultural demonstration parks. In order to strengthen the pest control, many agricultural demonstration parks in the region have installed automatic pest detection reports. light. The test light is specially developed for agricultural and forestry pest detection and reporting. It uses photoelectric technology to realize automatic insect trapping, insecticidal and sub-packaging functions. It is not only easy to operate, but also easy to use, and the effect of pest detection is good, and it can be used in agricultural demonstration parks. It provides an important basis for the prevention and control of green pests and helps the agricultural demonstration parks to carry out scientific field management.
"Preventing prevention first" has become an important policy for pest control in the agricultural sector. In order to better implement this policy, it is the most important task to strengthen the investigation and reporting of the occurrence and development of the field. In the past, the pest report mainly relied on manual investigation, the workload was large, and the effect of measuring the report was not good. It also delayed the time. Now it is handed over to the professional plant protection equipment such as automatic insect test light, which not only saves effort and worry, but also serves as an agricultural demonstration park. The scientific field management provided technical support and promoted the development of the agricultural demonstration parks in the right direction, such as green and high quality.
The busbar processing machine has five processing units: shearing, punching, large bending, and small bending. The main function of Busbar Machine is to process copper and aluminum bus bars of different specifications. It is easy and fast to use copper simply by using the corresponding processing unit. Aluminum row for shearing, punching (round hole, waist hole), flat bending, vertical bending, embossing, flattening, twist twist, pressure cable joints and other various processing. Bus processing machine widely used in high and low voltage switchgear, substation, busway, bridge, electrical switches, communications equipment, household appliances, shipbuilding, office automation equipment, elevator manufacturing, chassis cabinet manufacturing and other electrical complete manufacturing industry.
Function |
Item |
MODEL |
|||
HW-303 |
HW-503 |
HW-303S |
HW-503S |
||
Punching |
Max. Punching Force (KN) |
300 |
500 |
300 |
500 |
Punching Diameter Range (MM) |
Ø4.3-Ø25 |
Ø4.3-Ø34 |
Ø4.3-Ø25 |
Ø4.3-Ø34 |
|
Max. Thickness (MM) |
12 |
16 |
12 |
16 |
|
Max. Width (MM) |
150 |
200 |
150 |
200 |
|
Shearing/Cutting |
Max. Shearing Thickness (MM) |
12 |
16 |
12 |
16 |
Max. Shearing Width (MM) |
150 |
200 |
150 |
200 |
|
Honrizental Bending |
Max. Bending Force (KN) |
300 |
500 |
300 |
500 |
Max. Thickness (MM) |
150 |
200 |
150 |
200 |
|
Max. Width (MM) |
12 |
16 |
12 |
16 |
|
Vertical Bending |
Max. Width (MM) |
100 |
120 |
100 |
120 |
Max. Angle (Degree) |
90° |
90° |
90° |
90° |
|
Out Dimension |
MM |
1670*1200*1200 |
1800*1500*1300 |
1770*1400*1300 |
1980*1550*1460 |
Power |
KW |
3*4kw |
3*5.5kw |
3*4kw |
3*5.5kw |
Weight |
KG |
1200kg |
1750kg |
1360kg |
2200kg |
CNC Precision |
Bending Precision |
±1° |
±1° |
±1° |
±1° |
Repeat Bending Precision |
±0.3° |
±0.3° |
±0.3° |
±0.3° |
Busbar Machine
Busbar Machine,Three-In-One Busbar Machine,Hydraulic Busbar Machine,Busbar Processing Machine
Shandong Hengwang Group Co., Ltd , https://www.hwmac.com