According to the US "Automotive News" reported on May 23, General Motors has announced that it will recall 500 pickup trucks and SUVs because of the potential defects of the vehicle's airbag sensor.
GM said in an e-mailed statement that the recall was to address a defect in a potential supplier component that is responsible for controlling the sensing and diagnostic modules of the airbag. The models involved include: 2014 to 2015 Chevrolet Silverado, GMC Sierra, Chevrolet Suburban and Tahoe, GMC Yukon and Yukon XL.
Alan Adler, a spokesperson for GM, said that it is not yet known about the dealer inventory and the number of hidden vehicles that have been sold. The dealer will repair the stocked vehicle before it is sold.
General Motors told dealers on the 22nd to stop delivering about 3,500 pickups and SUVs because the company found the above problems. Adler said GM is recalling a small number of cars because it determines that only a small percentage of potential problem sensors are put into use, less than the pre-estimated amount.
GM's announcement to the dealer includes a list of vehicle identification numbers that can help it pinpoint its inventory. GM said that the vehicles not listed in the list are in good condition and can be delivered.
Suspected part
On the 22nd, GM issued another announcement to Cadillac dealers reminding them that there were some suspected parts in the car delivered to the dealer this week, hoping they could repair the defects of the recalled airbags on the 2015 Escalade models. problem.
GM had recalled 1,402 Carrades because of passenger airbag problems. The dealer can deliver these cars only after the repair is completed. GM has also notified the buyer that no one should sit in the passenger seat until the car is being serviced.
General Motors requires dealers to repeatedly confirm the serial number based on the list of suspected vehicles they have received before. Any suspected parts must be returned to General Motors.
The announcement said that if the dealer had installed replacement parts on the recalled Escalade, it had to move part of the dashboard to check the serial number to determine if it was a suspected vehicle. The inspection process takes approximately 35 minutes. It will take 50 minutes to replace a suspect component.
MG-608 Multifunctional Vegetable Cutter Machine
Specification
- Model Number: MG-608
- Condition: New
- Type: Cutter
- Place of Origin: Taiwan
- Power(W): 750w/375w/250w,380V/220V
- Weight: 145kg
- Dimension(L*W*H): 900*560*1200 mm
- Function: Multifunctional
- Material: 304 Stainless Steel
Packaging & Delivery
Delivery Detail: 15 Days After remittance confirmed
knife Specification
Globular rhizome
Shape & size :
Diced : 6*6,8*8,10*10,12*12,15*15,20*20,25*25,33*33,20*40,25*20 (mm)
Slice :1~10mm,12,15,20 (mm)
Filiform :2,2.5,3,4,5,6,7,7.5,8,9,10 (mm)
Leafy Vegetable
Shape
& size :
Filiform :2,2.5,3,4,5,6,7,7.5,8,9,10 (mm)
Slice : 1~60mm,Conveyor and knife speed are adjustable so can control
the size.
Multifunctional Vegetable Cutter Machine
Multifunctional Vegetable Cutter Machine,Multifunctional Vegetable Food Cutter Machine,Vegetable Cutter Machine,Electric Vegetable Cutter
Ming Chun Machinery Co., LTD. , http://www.veg-cutter.com