People take food as their day. With the improvement of people’s income and improvement of their lives, people’s demand for processed food products will increase and increase. These requirements will depend on the development of food machinery and packaging machinery. China's food and packaging machinery companies should keep up with the times and improve product quality, technical content and reliability in all directions to meet market demand.
The food industry has a vast market development space, which also shows that the related food packaging and packaging machinery has unlimited development space. After years of development, food packaging machinery has achieved certain results, but there are still many problems:
The gap with foreign products is big. China's food packaging machinery has made great achievements in recent years, but there are still 20 years of technological gaps compared with foreign products. There are many single machines and complete sets; there are many mainframes and few auxiliary machines; there are many products with low technological content, few products with high technology, high added value, and high productivity; there are many general models, and there are few special requirements and special types of materials processing.
The quality gap of mechanical products is mainly manifested in poor stability and reliability, backward modeling, rough appearance, short service life of basic parts and accessories, and short failure-free operation time. Most products have not yet established reliability standards, product performance, and foreign products of the same type. Compared with low production capacity and high energy consumption. The hourly production capacity of better products is only 1/2 of the advanced level in foreign countries, and energy consumption is more than double the level of foreign advanced products. At present, only 5% of China's food and packaging machinery have reached the level of foreign countries in the 1990s, 20% have reached the level of foreign 80s, and 60% have reached the level of foreign 1970s.
Research and development capabilities are low. The vast majority of food processing and packaging machinery manufacturing enterprises in China are small and medium-sized enterprises, and basically do not have independent research and development capabilities; due to insufficient scientific research investment, the experimental conditions of the institutes and institutions of higher education are not perfect, resulting in the products on the Chinese market are still mainly imitation , Surveying, or localization of a few reforms, the main technology of the industry depends on foreign countries, and there are few products with independent intellectual property rights. According to the regulations, technological development investment can account for 3% of sales revenue, but most companies invest very little money and cannot guarantee the development of new products and new technologies. The lack of innovation in product development and backward development means that they cannot provide timely products in response to market demand.
The scale of the company is small and the repeated construction is serious. Most of China's food packaging companies are small in scale. "Small and complete" is one of its main characteristics. Most companies have an annual output value of between a few million and 10 million, and there are still a few companies with less than 1 million. The average labor productivity of most enterprises is below RMB 100,000. Nearly 15% of companies convert or close down each year, but another 15% of companies join the industry and are extremely unstable. At the same time, mechanical products that are low in cost, relatively backward in technology, and easy to manufacture are repeatedly produced regardless of industry development requirements. Currently, about one quarter of the companies in the industry currently have low-level repeated production. This is a great waste of resources, causing confusion in the packaging machinery market and impeding the development of the industry.
Conclusion: It can be seen that the food packaging machinery industry needs to improve product quality, narrow the gap with foreign advanced level, advanced technology, advanced equipment, better packaging industry and food industry services, and then improve people's living standards and change people's lives. Following the packaging industry and consumers' consumption demands and consumption concepts and producing higher quality packaging machinery is the right path for the development of the packaging machinery industry.
The food industry has a vast market development space, which also shows that the related food packaging and packaging machinery has unlimited development space. After years of development, food packaging machinery has achieved certain results, but there are still many problems:
The gap with foreign products is big. China's food packaging machinery has made great achievements in recent years, but there are still 20 years of technological gaps compared with foreign products. There are many single machines and complete sets; there are many mainframes and few auxiliary machines; there are many products with low technological content, few products with high technology, high added value, and high productivity; there are many general models, and there are few special requirements and special types of materials processing.
The quality gap of mechanical products is mainly manifested in poor stability and reliability, backward modeling, rough appearance, short service life of basic parts and accessories, and short failure-free operation time. Most products have not yet established reliability standards, product performance, and foreign products of the same type. Compared with low production capacity and high energy consumption. The hourly production capacity of better products is only 1/2 of the advanced level in foreign countries, and energy consumption is more than double the level of foreign advanced products. At present, only 5% of China's food and packaging machinery have reached the level of foreign countries in the 1990s, 20% have reached the level of foreign 80s, and 60% have reached the level of foreign 1970s.
Research and development capabilities are low. The vast majority of food processing and packaging machinery manufacturing enterprises in China are small and medium-sized enterprises, and basically do not have independent research and development capabilities; due to insufficient scientific research investment, the experimental conditions of the institutes and institutions of higher education are not perfect, resulting in the products on the Chinese market are still mainly imitation , Surveying, or localization of a few reforms, the main technology of the industry depends on foreign countries, and there are few products with independent intellectual property rights. According to the regulations, technological development investment can account for 3% of sales revenue, but most companies invest very little money and cannot guarantee the development of new products and new technologies. The lack of innovation in product development and backward development means that they cannot provide timely products in response to market demand.
The scale of the company is small and the repeated construction is serious. Most of China's food packaging companies are small in scale. "Small and complete" is one of its main characteristics. Most companies have an annual output value of between a few million and 10 million, and there are still a few companies with less than 1 million. The average labor productivity of most enterprises is below RMB 100,000. Nearly 15% of companies convert or close down each year, but another 15% of companies join the industry and are extremely unstable. At the same time, mechanical products that are low in cost, relatively backward in technology, and easy to manufacture are repeatedly produced regardless of industry development requirements. Currently, about one quarter of the companies in the industry currently have low-level repeated production. This is a great waste of resources, causing confusion in the packaging machinery market and impeding the development of the industry.
Conclusion: It can be seen that the food packaging machinery industry needs to improve product quality, narrow the gap with foreign advanced level, advanced technology, advanced equipment, better packaging industry and food industry services, and then improve people's living standards and change people's lives. Following the packaging industry and consumers' consumption demands and consumption concepts and producing higher quality packaging machinery is the right path for the development of the packaging machinery industry.
Application Function: measurement for oxygen, crystallization for measuring carbon content, measuring low carbon content under the carbon oxygen balance principle,calculation and measurement of acid soluble aluminum
Molten Iron Sampler is made of fiber which is high quality and high temperature resistance. It is dedicated to collect metal liquid from furnace or ladle for chemical analysis. The sampler could be resistant to extreme cold and hot and there will be no cracks, which means that it can be used repeatedly
Sampler Lance,Molten Iron Sampler Lance,Double Thickness Sampler Lance,Immersion Sampler Lance
Cangzhou Qirun Detecting Instrument Co., Ltd. , http://www.qrdetecting.com