Introduction to programming of face milling

The working coordinate system of the car iron machining center: Generally, the numerical control lathe realizes the two-coordinate linkage, and the turning and milling machining center can realize the three-coordinate linkage. In the milling state, there is also a rotary axis C axis, which can achieve three-coordinate linkage with the X and Z axis.

Principle: The polar coordinate interpolation command is used for the face milling of the workpiece. The coordinate system is composed of the X axis (tool motion) and the C axis (chuck rotation). The coordinate plane is on the right end face of the workpiece. Among them, the X axis is called the first axis, and the rotation axis (C axis) is called the second axis or the imaginary axis.

When programming, in order to facilitate programming, the polar coordinate system is converted into a Cartesian coordinate system, that is, the unit of the virtual axis is not used, but is the same as the linear axis. When programming, the outer surface of the cylinder is unfolded so that programming is performed on a plane with the Z-axis in millimeters and the C-axis in degrees. Cylindrical interpolation commands make it possible to mill on the side of the cylinder, especially when machining eccentric grooves.

The format of the polar coordinate interpolation instruction: GlZl (into the polar coordinate interpolation mode), Gl3l (exit polar coordinate interpolation mode), GlZl and Gl3l are placed in a separate block. The procedure for face milling is completed between the two blocks.

(Finish)

Inroduction of Hammer Mill Crusher:

ROTEX MASTER Brand YSG series Wood Hammer Mill crusher  for wood chips is used for crushing all kinds of wood chips,straw, wood branches,corn stalks,rice husk,palm fiber,weeds and so on;
The wood hammer mill crusher structure is reasonable, durable, safe and reliable operation conveniently.
Slight vibration, high efficiency, mainly used for Wood pellet factory to produce wood pellet,then the wood pellets used at power plant,boiler factory,furnace and so on.
As the crushing equipment, ROTEX sawdust hammer mill  can smash the fine powder diameter to 1-12mm.
Normally, wood hammer mill crusher  should be matched with cyclone, fan blower and air lock. 
ROTEX wood hammer mill crusher with high quality and high efficiency.
ROTEX wood hammer mill crusher are approved by CE, SGS, ISO and other certificates.
Deeply welcomed by all the home and abroad customers.
>.Features of Hammer Mill Crusher:
(1)The motor and rotor are installed in the same heavy-duty base, using coupling direct drive, rotor passes accurate dynamic balancing test, the hammers are arranged symmetrically. 
(2)Unique Feeding Design, the feeding inlet is made at the side of the device to make feeding easily.
(3)The shell is welded by steel plate, the site in the crush room which connects to the materials all use the wearable and commutative parts and double wear plate.
(4)Hammers adopts special abrasion resistent treatment technology, extend its lifetime greatly.

Hammer

Screen

SIEMENS motor

Parameter of high efficiency wood hammer mill:

Wood Crusher Machine

Wood Crusher Machine, Electric Wood Crusher Machine,Large Capacity Wood Crusher Machine,Portable Wood Crusher Machine

Shandong Rotex Machinery Co.,Ltd , http://www.woodpelletmachinery.com