The filter used in the ketone benzene dewaxing and deoiling device of this factory has been using purchased lubricants, with an annual oil consumption of 200 tons. In order to reduce production and operating costs, and to develop technical reserves for the development of lubricating oil, the plant took the lubricant base oil produced by the plant as the main component, carried out research on lubricating oil replacement research, and finally achieved success. The filter oils they produce are comparable to those used in terms of viscosity, flash point, corrosion resistance, and other properties. Their extreme pressure and wear resistance are better than those of their oils.
At present, the die casting industry mainly die casts aluminum alloy, zinc alloy and magnesium alloy, as well as a small amount of copper alloy and other metal die casting parts. Since die-casting uses molds to form, a relatively long mold manufacturing cycle is required in the early stage, and the production efficiency is high after the mold is manufactured. Therefore, for die casting products, it is especially suitable for mass production, with relatively low cost and high efficiency. However, since the die-casting material is a metal material, it is more difficult to demould compared with the plastic material, so a relatively large demolding slope needs to be used, and the shrinkage of the metal itself causes the precision not to be very high. For positions that require precision assembly, subsequent secondary CNC machining is usually required to achieve the accuracy requirements. Die casting parts can be seen everywhere in industries such as automobiles, lighting, machinery, communications, electronics, and home appliances. Some die-casting products as shown below:
Die Casting Products,Die Cating Part,General Die Casging,Zinc Alloy Die Casting Parts,Zinc Alloy Die Casting,Metal Die Casting Products
Shenzhen SCZY Technology Co.,Ltd , https://www.szcasting.com