How to add steel balls according to the size of the steel ball. In the website consultation question and answer, our common customers consulted this way. In view of the questions from many customers, we will make another answer today. Different types of ball mills are selected according to the fineness of the abrasive. In the case of steel balls, the size and number of additions are different, generally as described below. Solution: This should be determined according to the diameter of the ball mill, the hardness of the ore, the size of the ore of the scoring mill, the hardness of the steel ball (mass), and the speed of the ball mill. When the model of the ball mill is determined, the speed of the ball mill is also fixed. The hardness of the ore is measurable. The ore particle size of the goal mill is determined by changing the size of the sieve. How to add steel balls to the ball mill according to the size of the steel ball? Now the authors put the perennial practice and theoretical experience as follows: Generally, the new ball mill has a running-in process. During the running-in process, the amount of steel balls is added for the first time, accounting for 80% of the maximum ball loading of the ball mill. The added ratio can be added according to the size of the steel ball (Φ120mm, Φ100mm, Φ80mm, Φ60mm, Φ40mm). Steel ball addition: Different ball mill models have different total ball loading. For example, the MQG1500×3000 ball mill (processing capacity 100-150 tons) has a maximum ball loading of 9.5-10 tons. The first addition of steel ball (? 120mm and ? 100mm) accounted for 30% -40%, the middle ball 80mm accounted for 40% - 30%, and the small ball (? 60 and ? 40mm) accounted for 30%.
Why is the ball volume only 80% added during the ball mill running-in process? After the ball mill is installed, the size of the ball mill needs to be meshed, and the amount of processing (the amount of ore) is gradually increased. After the ball mill runs normally for two or three days, the ball mill is stopped. Check the meshing of the large and small gears, wait until everything is normal, open the ball mill manhole cover and add the remaining 20% ​​steel balls for the second time. After the ball mill is turned on and running normally, the addition of each class of steel balls is added by 3:4:3 (?120mm is 3, ?100mm is 4, ?80mm is 3). Note: The addition of small steel balls is only the first time with the addition of the ball. Because, when the ball mill is in normal operation, the reasonable grinding between the steel ball and the steel ball, the steel ball and the ore, the steel ball and the ball mill lining will increase the wear, make the big ball grind small (grinding into the middle ball), the middle ball grinding For small balls. Therefore, under normal circumstances, there is no need to add a small ball. In the case of adding a small ball, there is no monomer dissociation at the useful mineral particle size, and when the fineness of the mill is not up to the flotation requirement, an appropriate amount of small balls can be added. The ball mill ball is continuously worn during the operation. In order to maintain the ball filling rate and the ball's reasonable ratio, and to maintain the stable operation of the ball mill, it is necessary to carry out reasonable ball filling and low compensation. The weight added by the steel ball is determined according to the quality of the steel ball and the quality of the steel ball. It is best to use a new wear-resistant steel ball. The best (good quality) steel ball addition is calculated according to the amount of ore processed per ton (ie 0.8kg per ton of ore). A typical steel ball needs to process one ton of ore (1kg - 1.2kg). Steel ball size ratio: different ball mill models have different ratios. The diameter of the ball mill is below 2500mm, and the size of the added steel ball is ?100mm, 80mm, 60mm. The diameter of the ball mill is 2500mm or more, and the size of the added steel ball is 120mm, 100mm, and 80mm.
Construction Bag,Construction Trash Bags,Construction Garbage Bags,Demolition Bags
Nantong Kezheng Packing Co.,ltd , https://www.ntdazhengplastic.com