Model NO.: WC67K 160T 3200
Type: Press Brake
Bending Dies: Alloy Steel
Tubing Connecto: Emb Form Germany Brand
Motor: Siemens
Main Motor: 11kw
Hydraulic System: Bosch Rexroth
Color: Red and Black
Foot Switch: Kacon From South Korea
Electricity: Schneider
Delivery: 30days
Control System: Da41s
Trademark: durmapress
Transport Package: Plastic Package, Fixed in The Container
Specification: 3750*1715*2450MM
Origin: Anhuimaanshan
HS Code: 846229900
Model NO.: WC67K 160T 3200
Type: Press Brake
Bending Dies: Alloy Steel
Tubing Connecto: Emb Form Germany Brand
Motor: Siemens
Main Motor: 11kw
Hydraulic System: Bosch Rexroth
Color: Red and Black
Foot Switch: Kacon From South Korea
Electricity: Schneider
Delivery: 30days
Control System: Da41s
Trademark: durmapress
Transport Package: Plastic Package, Fixed in The Container
Specification: 3750*1715*2450MM
Origin: Anhuimaanshan
HS Code: 846229900
The whole structure of the hydraulic press brake:
Welded structure: the stress of the welded parts can be eliminated by vibration; so this forging press gives high accuracy.
Frame: consists of right and left wall boards, working table, oil box, slot steel and etc. The stress of the welded parts can be eliminated by vibration. The machine enjoys high accuracy and high strength and can be transported easily.
High accuracy,high efficiency,simple and convenient operation,good performance, favorable price and best service.
1. Hydraulic system:Â
Adopt integrated hydraulic control system, more reliableÂ
Be installed at the top of the oil box, which can assure that the cylinder is always full of oil when the slide is moving down at high speedÂ
Consist of motor, oil pump and valve groupsÂ
Complete working cycle can be realized through the control of hydraulic valve.Â
The working pressure at the right side of the wall board can be adjusted by the remote adjustment valve
2. Protective fence and the safety interlockÂ
Protective fence and the safety interlocker to ensure the operation safety. Power supply switch that is set in the electric box will be automatically turned off when the box's door is opened or the fence is turned up. Protecting barrier with safety interlocker is mounted on the back of the machine. Another, there are travel limit protection and foot pedestal mounted emergency off switch.
3.Synchro control system:
Slide syncho system: adopt steel torsion bar synchro system, simple in structure and high in accuracyÂ
2 ends of slide has 2Â synchro fork which make,The system uses upper die compensation to improve the brake precision.
Adopt upper die compensation to improve the brake precision
4. Sectional Ram Clamp Bars:
Separate sectional clamping bars are supplied as standard equipment in order to securely fasten short dies, as well as standard length tooling. Unique crown correcting device is standard.
5. Advance technology and procedures:
This metal machining tool is a kind of steel torsion bar synchro press brake. -Electronic control of back gauges and ram stroke, data displayed and manual setting
Process of cylinder and sealing component:
Cylinder: no.45# steel treated, inner holes fine machined and extruded.
Valve rods: no.45# steel treated, nickel and phosphorous coated outside.
1.Main Features
Hydraulic drive, the machine at both ends of the cylinder placed in the slider, direct drive sliding work.
The use of mechanical block structure, stable and reliable.
Slider stroke maneuver fast tune, manual fine-tuning, counter display.
The use of all welded structure, with sufficient strength and rigidity.
The slider synchronization mechanism uses the torsion axis forcing synchronization.
Wedge-shaped deflection compensation mechanism to ensure a higher bending accuracy
2. Standard Equipment:Â
Delem DA41 CNC control System
Servo motor control block
HIWIN Ball screws &Â Polished rod with 0,01mm accuracy
Plate Support Arms
Germany Bosch-Rexroth Hydraulic
Germany EMB Tubing connector
Germany Siemens Main Motor
Tele mecanique/Schneider Electrics
Hydraulic &Electrical overload protection
Top and Bottom Tooling(86°,R0.6mm)
Safety Standards(2006/42/EC):
3. Safety Equipment:Â
1.EN 12622:2009 +Â A1:2013 2.EN ISO 12100:2010 3.EN 60204-1:2006+A1:2009Â
Front finger Protection(Safety light curtain)
South Korea Kacon Foot Switch(Level 4Â of safety)
Back metal safe fence with CE standards
Safety relay with Monitor the pedal switch and safety protection
• Advanced proportional valve controls the hydraulic cylinders to work synchronously and achieve precise repeatability performance
• Be capable of be controlled at random point within the stroke
• Repeatability precision +/-0.01mm,parallelism precision +/-0.02mm
• Deflection compensation table or crowning system for high precision
• Holland Delem DA52s CNC together with linear encoder,Bosch-Rexroth valves,servo motors and other famous brand elements to ensure excellent performance
Quick clamps is for easy operation of removing and changing upper punch tools
• Nylon material is used for front support to avoid scractch of sheets and improve the bending process
• Ram stroke (Y1,Y2) and backgauge (X,R,Z) are controlled by CNC
• Backgauge installed with ball screw and linear guide rail,ensuring high accuracy of repetition
• Stop fingers is sliding on linear rail for easy adjustment and high efficiency
• Multi-axis CNC controlled synchronous press brake available as metal sheet fabricating center
Optional elements for delem DA52s synchro cnc press brake
• Laser curtain of FIESSLER brand/ Laser curtain of LNTECH brand for personal saftey, especially to protect the fingers
•Customized specially tools for users' individul production
Â
Technical Data:
Model | WC67K-40/2000 | WC67K-40/2500 | WC67K-63/2500 | WC67K-80/2500 | WC67K-80/3200 | WC67K-80/4000 | WC67K-100/2500 | WC67K-100/3200 |
Capacity (kN) | 400 | 400 | 630 | 800 | 800 | 800 | 1000 | 1000 |
Bolster Length (mm) | 2000 | 2500 | 2500 | 2500 | 3200 | 4000 | 2500 | 3200 |
Between Columns  (mm) | 1650 | 2000 | 2000 | 1990 | 2600 | 3350 | 1850 | 2550 |
Throat Depth (mm) | 200 | 200 | 250 | 280 | 280 | 280 | 320 | 320 |
Slide Stroke  (mm) | 100 | 100 | 100 | 100 | 100 | 100 | 130 | 130 |
Stroke Adjustment(mm) | 80 | 80 | 80 | 80 | 80 | 80 | 100 | 100 |
Max. Shut Height(mm) | 330 | 330 | 340 | 360 | 360 | 360 | 390 | 390 |
SPM(min -1) | ≥ 11 | ≥ 11 | ≥ 10 | ≥ 10 | ≥ 10 | ≥ 10 | ≥ 10 | ≥ 10 |
Main Motor Power(kW) | 4 | 4 | 5.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
Net Weight(kW) | 3000 | 3600 | 4600 | 4800 | 6180 | 7720 | 6050 | 7400 |
Outline Size (L×W×H)(mm) | 2500×1900 | 2950×1920 | 3100×1890 | 3120×1910 | 3820×1925 | 4650×1925 | 3190×1945 | 3790×1945 |
×2240 | ×2240 | ×2200 | ×2300 | ×2300 | ×2300 | ×2420 | ×2420 | |
 |  |  |  |  |  |  |  |
Model | WC67K-100/4000 | WC67K-125/2500 | WC67K-125/3200 | WC67K-160/2500 | WC67K-160/3200 | WC67K-160/4000 | WC67K-160/6000 | WC67K-200/3200 |
Capacity (kN) | 1000 | 1250 | 1250 | 1600 | 1600 | 1600 | 1600 | 2000 |
Bolster Length (mm) | 4000 | 2500 | 3200 | 2500 | 3200 | 4000 | 6000 | 3200 |
Between Columns  (mm) | 3350 | 1850 | 2550 | 1950 | 2540 | 3140 | 4800 | 2550 |
Throat Depth (mm) | 320 | 320 | 320 | 330 | 330 | 330 | 330 | 350 |
Slide Stroke (mm) | 130 | 130 | 130 | 200 | 200 | 200 | 200 | 200 |
Stroke Adjustment(mm) | 100 | 100 | 150 | 150 | 150 | 150 | 150 | 150 |
Max. Shut Height(mm) | 390 | 390 | 390 | 465 | 465 | 465 | 465 | 450 |
SPM(min -1) | ≥ 10 | ≥ 10 | ≥ 10 | ≥ 6 | ≥ 6 | ≥ 6 | ≥ 6 | ≥ 3 |
Main Motor Power(kW) | 7.5 | 7.5 | 7.5 | 11 | 11 | 11 | 11 | 15 |
Net Weight(kW) | 8400 | 6100 | 7300 | 8900 | 9720 | 11160 | 18600 | 11440 |
Outline Size (L×W×H)(mm) | 4590×1945 | 3190×1945 | 3790×1935 | 3300×2225 | 4100×2250 | 4800×2250 | 6400×2250 | 3750×2180 |
×2420 | ×2420 | ×2420 | ×2560 | ×2560 | ×2560 | ×2960 | ×2825 | |
 |  |  |  |  |  |  |  |
Model | WC67K-200/4000 | WC67K-200/6000 | WC67K-250/3200 | WC67K-250/4200 | WC67K-250/5000 | WC67K-250/6000 | WC67K-300/4000 | WC67K-300/5000 |
Capacity (kN) | 2000 | 2000 | 2500 | 2500 | 2500 | 2500 | 3000 | 3000 |
Bolster Length (mm) | 4000 | 6000 | 3200 | 4200 | 5000 | 6000 | 4000 | 5000 |
Between Columns  (mm) | 3260 | 4800 | 2540 | 3140 | 4000 | 5000 | 2900 | 3900 |
Throat Depth (mm) | 350 | 350 | 400 | 400 | 400 | 400 | 400 | 400 |
Slide Stroke (mm) | 200 | 200 | 250 | 250 | 250 | 250 | 250 | 250 |
Stroke Adjustment(mm) | 150 | 150 | 180 | 180 | 180 | 180 | 180 | 180 |
Max. Shut Height(mm) | 450 | 450 | 500 | 500 | 500 | 500 | 535 | 535 |
SPM(min -1) | ≥ 3 | ≥ 3 | ≥ 3 | ≥ 3 | ≥ 3 | ≥ 3 | ≥ 3 | ≥ 3 |
Main Motor Power(kW) | 15 | 15 | 18.5 | 18.5 | 18.5 | 18.5 | 22 | 22 |
 |  |  |  |  | ||||
Net Weight(kW) | 13400 | 21300 | 13840 | 15320 | 17100 | 18600 | 24400 | 27100 |
Outline Size (L×W×H)(mm) | 4450×2180 | 6420×2180 | 3840×2250 | 4840×2250 | 5640×2250 | 6420×2250 | 4400×2250 | 5400×2250 |
×2825 | ×2900 | ×2920 | ×2920 | ×2980 | ×2980 | ×3115 | ×3115 | |
 |  |  |  |  |  |  |  |
Our Services and Guarantee:
1.Pre-sales:help client select the suitable machine
2.Quality guarantee:machine warranty is 1years.Extra fee is paid if out of date.
3.Training service:offer training video of how to use our machines
4.After-sales:provide free technical guidance
5.we arrange final test before shipment
6. when receiving the your money, we will prepare machine for you,it will spend 15-30days, to get the shipping pictures for you.
7.Other services :
1): response within 1Â hours
2): provide solution in 1Â day
3): solve complaint in 2Â days
Â
Â
FAQ:
1, How to pay ?
We can accept 30% deposit , and balance paid to us before delivery machine to you .
2, How long is the delivery time?Â
Usually,The machine will be finished within 30 days after receving your deposit.
3, Do you arrange shipment for the machines?Â
Yes, for CRF or CIF price, we will arrange shipment for you. For FOB price, clients need to arrange shipment by themselves or their agents.
4,How about the documents after shipment?Â
After shipment, we will send all original documents to you by DHL, including Packing List, Commercial Invoice, B/L, and other certificates as required by clients.
5, How is the packing?
Water-proof plastic film package with foam protection in each cornerÂ
Save space as much as possible for container loading .
6:Do you accept LC payment ?
Yes, normally our payment is 30%+70% T/T ,LC payment is also acceptable
7How to operate this machine ?
Video line of our factory or we send you the moive directly.
8:What about commissioning service ?
We can offer commissioning service , the buyer need to afford plane tickets.
9:Do you offer teaching &Â training ?
We provide the service and can training at supplier's plant.
Conatct :
Kelly XiaÂ
Â
Â
Â
Â
Â
The whole structure of the hydraulic press brake:
Welded structure: the stress of the welded parts can be eliminated by vibration; so this forging press gives high accuracy.
Frame: consists of right and left wall boards, working table, oil box, slot steel and etc. The stress of the welded parts can be eliminated by vibration. The machine enjoys high accuracy and high strength and can be transported easily.
High accuracy,high efficiency,simple and convenient operation,good performance, favorable price and best service.
1. Hydraulic system:Â
Adopt integrated hydraulic control system, more reliableÂ
Be installed at the top of the oil box, which can assure that the cylinder is always full of oil when the slide is moving down at high speedÂ
Consist of motor, oil pump and valve groupsÂ
Complete working cycle can be realized through the control of hydraulic valve.Â
The working pressure at the right side of the wall board can be adjusted by the remote adjustment valve
2. Protective fence and the safety interlockÂ
Protective fence and the safety interlocker to ensure the operation safety. Power supply switch that is set in the electric box will be automatically turned off when the box's door is opened or the fence is turned up. Protecting barrier with safety interlocker is mounted on the back of the machine. Another, there are travel limit protection and foot pedestal mounted emergency off switch.
3.Synchro control system:
Slide syncho system: adopt steel torsion bar synchro system, simple in structure and high in accuracyÂ
2 ends of slide has 2Â synchro fork which make,The system uses upper die compensation to improve the brake precision.
Adopt upper die compensation to improve the brake precision
4. Sectional Ram Clamp Bars:
Separate sectional clamping bars are supplied as standard equipment in order to securely fasten short dies, as well as standard length tooling. Unique crown correcting device is standard.
5. Advance technology and procedures:
This metal machining tool is a kind of steel torsion bar synchro press brake. -Electronic control of back gauges and ram stroke, data displayed and manual setting
Process of cylinder and sealing component:
Cylinder: no.45# steel treated, inner holes fine machined and extruded.
Valve rods: no.45# steel treated, nickel and phosphorous coated outside.
1.Main Features
Hydraulic drive, the machine at both ends of the cylinder placed in the slider, direct drive sliding work.
The use of mechanical block structure, stable and reliable.
Slider stroke maneuver fast tune, manual fine-tuning, counter display.
The use of all welded structure, with sufficient strength and rigidity.
The slider synchronization mechanism uses the torsion axis forcing synchronization.
Wedge-shaped deflection compensation mechanism to ensure a higher bending accuracy
2. Standard Equipment:Â
Delem DA41 CNC control System
Servo motor control block
HIWIN Ball screws &Â Polished rod with 0,01mm accuracy
Plate Support Arms
Germany Bosch-Rexroth Hydraulic
Germany EMB Tubing connector
Germany Siemens Main Motor
Tele mecanique/Schneider Electrics
Hydraulic &Electrical overload protection
Top and Bottom Tooling(86°,R0.6mm)
Safety Standards(2006/42/EC):
3. Safety Equipment:Â
1.EN 12622:2009 +Â A1:2013 2.EN ISO 12100:2010 3.EN 60204-1:2006+A1:2009Â
Front finger Protection(Safety light curtain)
South Korea Kacon Foot Switch(Level 4Â of safety)
Back metal safe fence with CE standards
Safety relay with Monitor the pedal switch and safety protection
• Advanced proportional valve controls the hydraulic cylinders to work synchronously and achieve precise repeatability performance
• Be capable of be controlled at random point within the stroke
• Repeatability precision +/-0.01mm,parallelism precision +/-0.02mm
• Deflection compensation table or crowning system for high precision
• Holland Delem DA52s CNC together with linear encoder,Bosch-Rexroth valves,servo motors and other famous brand elements to ensure excellent performance
Quick clamps is for easy operation of removing and changing upper punch tools
• Nylon material is used for front support to avoid scractch of sheets and improve the bending process
• Ram stroke (Y1,Y2) and backgauge (X,R,Z) are controlled by CNC
• Backgauge installed with ball screw and linear guide rail,ensuring high accuracy of repetition
• Stop fingers is sliding on linear rail for easy adjustment and high efficiency
• Multi-axis CNC controlled synchronous press brake available as metal sheet fabricating center
Optional elements for delem DA52s synchro cnc press brake
• Laser curtain of FIESSLER brand/ Laser curtain of LNTECH brand for personal saftey, especially to protect the fingers
•Customized specially tools for users' individul production
Â
Technical Data:
Model | WC67K-40/2000 | WC67K-40/2500 | WC67K-63/2500 | WC67K-80/2500 | WC67K-80/3200 | WC67K-80/4000 | WC67K-100/2500 | WC67K-100/3200 |
Capacity (kN) | 400 | 400 | 630 | 800 | 800 | 800 | 1000 | 1000 |
Bolster Length (mm) | 2000 | 2500 | 2500 | 2500 | 3200 | 4000 | 2500 | 3200 |
Between Columns  (mm) | 1650 | 2000 | 2000 | 1990 | 2600 | 3350 | 1850 | 2550 |
Throat Depth (mm) | 200 | 200 | 250 | 280 | 280 | 280 | 320 | 320 |
Slide Stroke  (mm) | 100 | 100 | 100 | 100 | 100 | 100 | 130 | 130 |
Stroke Adjustment(mm) | 80 | 80 | 80 | 80 | 80 | 80 | 100 | 100 |
Max. Shut Height(mm) | 330 | 330 | 340 | 360 | 360 | 360 | 390 | 390 |
SPM(min -1) | ≥ 11 | ≥ 11 | ≥ 10 | ≥ 10 | ≥ 10 | ≥ 10 | ≥ 10 | ≥ 10 |
Main Motor Power(kW) | 4 | 4 | 5.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
Net Weight(kW) | 3000 | 3600 | 4600 | 4800 | 6180 | 7720 | 6050 | 7400 |
Outline Size (L×W×H)(mm) | 2500×1900 | 2950×1920 | 3100×1890 | 3120×1910 | 3820×1925 | 4650×1925 | 3190×1945 | 3790×1945 |
×2240 | ×2240 | ×2200 | ×2300 | ×2300 | ×2300 | ×2420 | ×2420 | |
 |  |  |  |  |  |  |  |
Model | WC67K-100/4000 | WC67K-125/2500 | WC67K-125/3200 | WC67K-160/2500 | WC67K-160/3200 | WC67K-160/4000 | WC67K-160/6000 | WC67K-200/3200 |
Capacity (kN) | 1000 | 1250 | 1250 | 1600 | 1600 | 1600 | 1600 | 2000 |
Bolster Length (mm) | 4000 | 2500 | 3200 | 2500 | 3200 | 4000 | 6000 | 3200 |
Between Columns  (mm) | 3350 | 1850 | 2550 | 1950 | 2540 | 3140 | 4800 | 2550 |
Throat Depth (mm) | 320 | 320 | 320 | 330 | 330 | 330 | 330 | 350 |
Slide Stroke (mm) | 130 | 130 | 130 | 200 | 200 | 200 | 200 | 200 |
Stroke Adjustment(mm) | 100 | 100 | 150 | 150 | 150 | 150 | 150 | 150 |
Max. Shut Height(mm) | 390 | 390 | 390 | 465 | 465 | 465 | 465 | 450 |
SPM(min -1) | ≥ 10 | ≥ 10 | ≥ 10 | ≥ 6 | ≥ 6 | ≥ 6 | ≥ 6 | ≥ 3 |
Main Motor Power(kW) | 7.5 | 7.5 | 7.5 | 11 | 11 | 11 | 11 | 15 |
Net Weight(kW) | 8400 | 6100 | 7300 | 8900 | 9720 | 11160 | 18600 | 11440 |
Outline Size (L×W×H)(mm) | 4590×1945 | 3190×1945 | 3790×1935 | 3300×2225 | 4100×2250 | 4800×2250 | 6400×2250 | 3750×2180 |
×2420 | ×2420 | ×2420 | ×2560 | ×2560 | ×2560 | ×2960 | ×2825 | |
 |  |  |  |  |  |  |  |
Model | WC67K-200/4000 | WC67K-200/6000 | WC67K-250/3200 | WC67K-250/4200 | WC67K-250/5000 | WC67K-250/6000 | WC67K-300/4000 | WC67K-300/5000 |
Capacity (kN) | 2000 | 2000 | 2500 | 2500 | 2500 | 2500 | 3000 | 3000 |
Bolster Length (mm) | 4000 | 6000 | 3200 | 4200 | 5000 | 6000 | 4000 | 5000 |
Between Columns  (mm) | 3260 | 4800 | 2540 | 3140 | 4000 | 5000 | 2900 | 3900 |
Throat Depth (mm) | 350 | 350 | 400 | 400 | 400 | 400 | 400 | 400 |
Slide Stroke (mm) | 200 | 200 | 250 | 250 | 250 | 250 | 250 | 250 |
Stroke Adjustment(mm) | 150 | 150 | 180 | 180 | 180 | 180 | 180 | 180 |
Max. Shut Height(mm) | 450 | 450 | 500 | 500 | 500 | 500 | 535 | 535 |
SPM(min -1) | ≥ 3 | ≥ 3 | ≥ 3 | ≥ 3 | ≥ 3 | ≥ 3 | ≥ 3 | ≥ 3 |
Main Motor Power(kW) | 15 | 15 | 18.5 | 18.5 | 18.5 | 18.5 | 22 | 22 |
 |  |  |  |  | ||||
Net Weight(kW) | 13400 | 21300 | 13840 | 15320 | 17100 | 18600 | 24400 | 27100 |
Outline Size (L×W×H)(mm) | 4450×2180 | 6420×2180 | 3840×2250 | 4840×2250 | 5640×2250 | 6420×2250 | 4400×2250 | 5400×2250 |
×2825 | ×2900 | ×2920 | ×2920 | ×2980 | ×2980 | ×3115 | ×3115 | |
 |  |  |  |  |  |  |  |
Our Services and Guarantee:
1.Pre-sales:help client select the suitable machine
2.Quality guarantee:machine warranty is 1years.Extra fee is paid if out of date.
3.Training service:offer training video of how to use our machines
4.After-sales:provide free technical guidance
5.we arrange final test before shipment
6. when receiving the your money, we will prepare machine for you,it will spend 15-30days, to get the shipping pictures for you.
7.Other services :
1): response within 1Â hours
2): provide solution in 1Â day
3): solve complaint in 2Â days
Â
Â
FAQ:
1, How to pay ?
We can accept 30% deposit , and balance paid to us before delivery machine to you .
2, How long is the delivery time?Â
Usually,The machine will be finished within 30 days after receving your deposit.
3, Do you arrange shipment for the machines?Â
Yes, for CRF or CIF price, we will arrange shipment for you. For FOB price, clients need to arrange shipment by themselves or their agents.
4,How about the documents after shipment?Â
After shipment, we will send all original documents to you by DHL, including Packing List, Commercial Invoice, B/L, and other certificates as required by clients.
5, How is the packing?
Water-proof plastic film package with foam protection in each cornerÂ
Save space as much as possible for container loading .
6:Do you accept LC payment ?
Yes, normally our payment is 30%+70% T/T ,LC payment is also acceptable
7How to operate this machine ?
Video line of our factory or we send you the moive directly.
8:What about commissioning service ?
We can offer commissioning service , the buyer need to afford plane tickets.
9:Do you offer teaching &Â training ?
We provide the service and can training at supplier's plant.
Conatct :
Kelly XiaÂ
Â
Â
Â
Â
Â
We are counted among the leading traders and suppliers of a wide array of Wiper Motor. The entire range of motors is designed in accordance with international quality standards, utilizing quality-approved material and modern technology. Further, we keep a bulk stock of these motors in our warehouse for meeting the urgent needs of our clients.
Wiper Motor,12V Wiper Motor,Doga Wiper Motor,Heavy Truck Wiper Motor
COMOTECH ASIA PACIFIC (HANGZHOU)CO.,LTD , https://www.capwiper.com