SDJ-SG-2(B) type vibration speed sensor can be used to measure various displacements, speeds, etc. after being connected with vibration and intensity meter. The vibration of the rotor supported by the rolling bearing is transmitted to the bearing cover. The SDJ-SG-2(B) type vibration speed sensor mounted on the bearing cover cuts the magnetic force line and outputs the voltage by the internal moving coil to provide signals to the monitoring instrument. Used to predict and alarm mechanical failures.
Installation position: vertical or horizontal installation on the measured vibration point, the bottom of the sensor is fixed with M10 screws.
The installation position of CD-21-C vibration speed sensor is: vertical installation on the measured vibration point, and the bottom of the sensor is fixed with M8 screws.
Technical indicators:
Sensitivity: 280mV/cm/S±5%
Frequency response: 10 to 1000 Hz
Amplitude limit: 2mm (peak-to-peak)
Acceleration: 10g
Installation method: vertical
Temperature range: -30°C～120°C
Relative humidity: up to 95% non-condensing
Maximum Load: 500-5000kg
One primary use of the electric belt hoist is in applications that have special hygiene and safety requirements, such as in food industry, chemical industry, and precision machining industry, chemical industry, and precision machining industry.
Features
High-strength hoisting belt allows easy and quick belt replacement while presenting high safety factors.
Enhanced safety features against side pulling and twisting effects during lifting movement.
Hoisting and control features complying with IEC 34.1/IEC 34.2,IP 55
Fully enclosed reduction gear delivers high precision.
Adjustable upper and lower position limit switches
Compact design takes up little space.
Truly vertical lifting motion without deviation to the side.
Electric Belt Hoist
Electric Belt Hoist,Boat Hoist,Chain Hoist For Crane,Electric Wire Hoists
Eurocrane (China) Co., Ltd. , https://www.craneparts.pl