With the improvement of people’s living standards, tourism has become the main leisure mode of everyday life and a flavoring agent in life. In particular, the number of people who choose to travel on holiday trips is more, ticket purchases are difficult, and the low efficiency of manual ticket inspections in and out of tourist destinations directly affects the development of scenic spots and the experience of tourists.
It has become more and more important to resolve the efficiency of ticket inspection in and out of the area. Many scenic spots now use scenic gates to coordinate with scenic ticketing systems, which has enabled the intelligent ticket inspection to greatly increase the efficiency of the scenic ticket inspection, allowing visitors to enter the scenic area more conveniently and quickly.
Wing gates are a common type of gates in the scenic area. Let us briefly introduce the common types of wing gates in scenic gates.
　　 Scenic gates gate wing instructions:
1. Before the wing gate is put into use, it must be debugged through function; after normal operation, it can be put into use;
2. It is strictly forbidden to station people in the channel when the wing gate equipment is powered on;
3. When a pedestrian reads a cartoon, the sign of the direction indicator does not turn green, and access to the channel is forbidden; when a pedestrian passes through the channel, do not stay in the middle of the channel for a long time;
4. When the wing gate passes through the gate, it should not be crowded, and there should be a certain interval between people; it is strictly forbidden to read the card and quickly pass through the gateway;
5. It is advisable to mark the passage notice of the machine at a conspicuous position in the work of the equipment and guide the passers through safe passage through the gate;
6. The wing gate equipment should be properly managed when it is not working. It is forbidden to knock and shake the equipment.
7. When the wing gate of the scenic gate is closed, it is forbidden to push or pull the gate;
Scenic gate ticket system requirements:
Ticket checking function: one ticket for one person, one vote for multiple persons, text picture display, voice prompts, admission statistics, brush ticket interval, gate status, platform scan barcode, read IC card, fingerprint verification, inspection ID card, insert card Hole, ticket card recycling;
Report query function: basic sales and ticket data query, analysis report query, and leadership report query.
Individual customer management: selling tickets for individual customers, including multiple admissions, showing ticket type and prompt voice when checking tickets;
Member management: Issue membership card, registration information (identity card, photo, fingerprint, etc.), check ticket to display name, photo, fingerprint verification, identity card, etc.;
Team management: more marketing planning, registration of tour guides, travel agency information, travel agency management and performance statistics, more than one ticket, team discount (eg: 10 exemption, etc.), need to sign bills, rebate functions; in the park On the other hand, there are single admissions and multiple admissions;
Passenger flow management in the scenic area: the ticket gate shows the number of people entering the park, the large screen shows the number of people entering the park and the current number of people in the park, and the gates of the scenic area can display notifications to divert tourists.
The fault treatment instructions of the wing gate of the gate of the gate area:
(1)After brushing the wing gate of the gate of the scenic gate, the door is not opened, there is no response, or it is not turned on automatically after power off. Check again to see if there is any drop in the signal line. Check the signal indicator on the main board. Did you receive an open signal?
(2) After swiping, the gate opens but the gate does not close. This situation is usually not good for the middle anti-clip infrared. Before fixing the chassis, it must be determined that the infrared pair is good enough to open and close the door normally. If there is no good infrared, after power on, it will alarm. After swiping, please use the direction arrow to exercise.
(3) The operating state of the wing gate direction indication is that the green arrow points left, right, or red cross. If the direction indicates no response, or the direction of the indication is incorrect. You can switch to another test and try it with a good one. Check the wiring again.
(4) After the gates of the scenic gates are swiped, there is one open and one not open. Check again if the sync line is connected. After the connection is guaranteed, if the motherboard that does not open has received an open signal, if not, check whether the connection is dropped or if the plug on the motherboard is plugged in.
The ignition system is a component of electrical parts, and it is also an important part of the engine. The good performance of the ignition system has a great impact on the engine power, fuel consumption and exhaust pollution.The ignition system is mainly composed of an ignition switch, an ignition module (igniter), an ignition coil, a high voltage group line, a spark plug, etc., and its function is to provide an electric spark to the cylinder to ignite the combustible mixture in the cylinder at a prescribed time.Any need of new holland ignition system,please contact with us freely,
Electrical Parts For New Holland
Electrical Parts For New Holland,New Holland Electronic Parts,New Holland Electronic Components,New Holland Electrical Accessories Parts
Hangzhou Holdwell Mechanical&Electrical Co.,LTD , https://www.holdwellparts.com