1. The box body of the garbage truck with compression type is welded with steel plates of 8mm, 5mm, 4mm and 16Mn. The channel steel in the bottom of the car box is not only the basic component for the connection and connection of the steel body structure, but also the push plate to the support. Lightweight maximizes the effective space of the cabinet and reduces the structural center of gravity.
The floor of the car box is a fully sealed structure, and the sewage is corroded. All the water in the car tank is drained into the sewage tank of the bucket body to avoid corrosion of the box body and the car chassis, as well as to avoid leakage of sewage to the roadside during driving, and effectively prevent secondary pollution.
2. Garbage loader The garbage loader consists of a frame-shaped skeleton, guide rails, arc hoppers, scrapers, skateboards, negative pressure plates, and lightweight cover pieces. Through the sequential actions of the scraper cylinder, the slide cylinder and the negative pressure plate, the function of circulating the material in the hopper into the car box is realized. There are eight wheels on both sides of the skateboard. The friction coefficient is low, the strength is high, and micro-oscillations can be made to ensure long-term use of the guide rails without wear.
The loader is also a sealing device at the rear of the compartment, which is opened and closed by a lift cylinder, a sliding hinge and a locking device.
There is a recovery tank at the bottom of the loader. The accumulated water in the compartment and the excess water in the hopper flow into the recovery tank. When discharging, the sewage in the recovery tank can be completely discharged by itself or manually.
3, the turnover mechanism according to the needs of the user can be equipped with turning barrel mechanism, flap mechanism or tipping mechanism, which uses hydraulic double-acting double cylinder flip, the iron barrel or plastic barrel re-turning process is locked by the system, safe and stable, Reasonable structure.
Note that when the entire vehicle moves, the mechanism is turned upside-down to facilitate normal driving.
4. Hydraulic system The hydraulic cylinder of the vehicle adopts the circuit to control the gas path, the gas path valve controls the cylinder, the cylinder operates the hydraulic multi-way valve, and the hydraulic multi-path valve controls the cylinder operation. The operation is simple and reliable. At the same time, it also has a manual direct operation of the hydraulic multi-way valve, with a bi-directional control of a single hydraulic system.
Hydraulic system consists of fuel tank and filter system, oil pump, multi-way valve, one-way throttle, cylinder, tubing and other components. The power of the system comes from the engine. The power is separated by a power take-off device. The power take-off device drives the gear pump.
The gear pump sucks the hydraulic oil in the hydraulic tank through the suction oil filter and supplies the multi-way valve (located behind the cab, in the front of the cab). When the multi-way valve is working, the negative pressure plate cylinder, the slide plate cylinder, the scraper cylinder, the bucket cylinder or the push plate cylinder are operated. When the hydraulic cylinder is not working, the hydraulic oil returns to the tank directly via the multi-way valve. If you want to know more details contact us at 400-808-9955.
These elevators include a wide range of products that can provide access to mid-rise up to high-rise heights and can carry anywhere from a few hundred to several thousand pounds. The lifts can be as simple as a portable scissor lift or as customized as fitted scaffolding hoists.
1. Our History:
LITE Crane Co., LTD has focused on top quality Crane Parts for over 14 years in China. We started as a small operation, but now have become one of the leading suppliers in the crane industry in China.
Today, LITE Crane Co., LTD has been one of the top producers of quality crane and crane parts, such as: Electric Hoist, single, double girder bridge, gantry, grab, casting, explosion-proof crane series and accessories.
2. Our Factory:
LITE Crane Co., LTD is located in Xinxiang, Henan Province China. The company covers an area of 680 thousand square meters and owns more than 2700 employees. The annual sales of LITE Crane Co., LTD is 1.6 billion USD, there are more than 600 sales agencies at home and abroad and more than 180 middle& senior engineering and technical personnel who are in charge of design and development of all products and also own the development center of their new technology and products.
3.Our Product:
Our Products includes the following:
1, Crane accessories
2, Electric hoist
3, Single - beam cranes
4, Double - beam cranes
5, Bridge Crane
6, Gantry Crane
7.Lifting equipment and accessories
We supply crane products all over the globe to a wide range of companies worldwide.
4.Product Application:
The products are widely used in the following industry, such as power plants, nuclear power, water conservancy, tunnels, bridges, petrochemical, metallurgy, construction, open-air warehouse, wharf, workshop ...
5.Our Certificate:
Our company is a member of China Crane Association and vice chairman company of China Heavy Machinery Association. It owns the production licenses of electric hoist, single & double-girder crane, the safety of the approval certificate of manufacturing, installation and maintenance, the safety approval certificate of the manufacturing of 320T bridge crane, portal crane and 280Tcasting crane.
The company has passed the quality system certification of GB/T19001 -2008/IS09001:2008, the environmental management system certification of GB/T24001-2004/ISO14001:2004 and the occupational health and safety management system certification GB/T28001-2001.
6.Production Equipment:
There are 1600 units of all kinds of processing equipment which can independently accomplish all the processes such as milling, digging, grinding, pulling, boring, rolling, drilling, punching, cutting, bending, welding, testing and heat treatment.
7.Production Market:
Our products are sold to more than 30 provinces, municipalities and autonomous regions in China, and also exported to Australia, Vietnam, India, Thailand and some Southeast Asian countries. The annual sales of double-girder and portal cranes is more than 3600 units, more than 23000 units single-girder cranes, about 23000 units single-girder & double-girder electric hoist and accessories. The production and sales of the single-girder cranes has lead the nation for seven consecutive years and the per capita output and economic benefits are among the best in the same industry.
8.Our service:
Besides our existing molded products, LITECrane Co., LTD also can produce products according to the drawings or samples from our customers. We control the product quality critically for every step during the manufacturing from custom.
Construction Elevator,Building Construction Hoist,Building Material Hoists,Construction Bulk Hoist Elevator
Shandong Lite Electrical Co.,Ltd , http://www.chinacranegroup.com