1, the flow, head can be adjusted, adaptable and strong with the same pump, according to the size of the pipe resistance and flow requirements, adjust its head and flow. Or increase the lift and reduce the flow; or reduce the lift and increase the flow. Therefore, the same pump can be used for different conditions. If the pipeline resistance does not change, the pump head will not change. You can adjust the flow rate by adjusting the motor speed to meet the actual demand.
2. The anti-corrosion and antimony Yida shares the simple shape of the pump body and is easy to lining anti-corrosion; the medium has a small flushing effect on the pump body.
3, wear-resistant medium in the pump at low speed movement, and does not change the direction of movement, the solid particles in the medium impact on the pump body, flushing effect is small.
4. It is not easy to plug the media channel with a simple and unobstructed shape, and the debris in the media is not easily left in the channel memory.
5, long service life, medium low-speed movement, medium solids impact on the pump body is small, impurities difficult to plug. Therefore, the pump has a long service life.
6, high-efficiency Yi Yi Da shares media in the pump does not change the direction of movement; pump parts do not do high-speed rotary motion, only to do low-speed linear reciprocating motion; only linear friction produces useless work.
7. The head of the high lift pump is not directly dependent on the motor speed but the piston thrust of the pump. The piston thrust of the pump is proportional to the output torque of the motor. High-torque motors are much less difficult to manufacture than high-speed motors. Therefore, it is easy to make a high lift pump.
8, large flow to increase the motor speed or increase the pump cylinder diameter, can increase the pump flow.
9. The flow rate is independent of the pipe resistance. The pump flow rate depends only on the pump cylinder diameter and the piston movement speed. The piston movement speed depends only on the motor speed. The flow has nothing to do with the resistance of the pipeline.
10. With the change of pipeline resistance, the lift self-adjusts the balance between the Pump Piston thrust and pipeline resistance. In the pump's maximum lift, the pump's piston thrust decreases automatically as the pipe resistance decreases. Correspondingly, the output torque of the motor automatically decreases as the pipe resistance decreases. This avoids excess pressure at the outlet of the pipeline and reduces energy consumption without changing the flow. At present, there is a widespread phenomenon of excess pressure in pipeline outlets. Therefore, the use of reciprocating pumps as power equipment for pipeline systems is of great significance for energy conservation.
Concrete Pump Pipeline systems
ST52 Pipe
4
item
Description
Material
Paint
1
DN125 x 3M x 4.5mm sk flange
ST52 weld
Electrostatic Coating
2
DN125 x 3M x 4.5mm sk flange
ST52 Seamless
Electrostatic Coating
3
DN125 x 3M x 7.1mm sk flange
ST52 Seamless
Electrostatic Coating
DN125 x 3M x 8.0mm sk flange
ST52 Seamless
Electrostatic Coating
5
DN100 x 3M x 4.1mm sk flange
ST52 weld
Electrostatic Coating
6
DN100 x 3M X 4.1mm sk flange
ST52 Seamless
Electrostatic Coating
Hardened Pipe
Pipeline And Flange Systems,Pipeline Concrete Pumping,Concrete Pump Pipe,Concrete Pump Pipeline
HBYM GROUP Co,.LTD , http://www.hbympumpparts.com