The new digital CO2 detector has significant differences and advantages in the amount of observation information and accuracy compared with the manual observation, mainly because the instrument is characterized by its strong stability, high sensitivity, automation, and intelligent characteristic design. Replace the former observation method. Carbon dioxide detectors do not need to observe the rotation in different places such as groundwater dissolved gas, station fault escape gas, etc., and can automatically record dynamic changes.
The carbon dioxide detector is placed in the middle of the air collecting device of the outdoor fault soil. The gas gathering device is generally located in the sand layer 5 to 10m deep below the ground surface. The host is installed in the observation room, and the sensor is connected to the host computer cable. Its length is about 15m. Use station "15" network protocol communication. During the test, continuous, stable and reliable observation data of carbon dioxide detectors were obtained. The experiment proved the feasibility of carbon dioxide infrared gas sensing technology in the measurement of carbon dioxide fault gas and dissolved gas.
For artesian wells, dissolved gas can be used for observation. The gas collection mode is degassing. A degassing system can be shared with the current station's automatic helium detector. The carbon dioxide detector can be connected to the gas path of the automatic helium detector. Communication and faults can be used. The gas observation mode is the same. In order to adapt to the harsh working environment in the wild, the instrument is designed with a three-level power surge protection overvoltage protection circuit.
The CO2 detector uses a dual-beam infrared CO2 sensor, which is a compact infrared gas sensor that combines mature infrared absorption gas detection technology with micro-machining and sophisticated circuit design. The CO2 detector also has a function of temperature compensation, which is less dependent on oxygen. It can be used in various places where carbon dioxide gas is present. It has a wide range of applications and is versatile. Intelligent, low-maintenance, low-cost, long-life instrument.
The carbon dioxide detector is placed in the middle of the air collecting device of the outdoor fault soil. The gas gathering device is generally located in the sand layer 5 to 10m deep below the ground surface. The host is installed in the observation room, and the sensor is connected to the host computer cable. Its length is about 15m. Use station "15" network protocol communication. During the test, continuous, stable and reliable observation data of carbon dioxide detectors were obtained. The experiment proved the feasibility of carbon dioxide infrared gas sensing technology in the measurement of carbon dioxide fault gas and dissolved gas.
For artesian wells, dissolved gas can be used for observation. The gas collection mode is degassing. A degassing system can be shared with the current station's automatic helium detector. The carbon dioxide detector can be connected to the gas path of the automatic helium detector. Communication and faults can be used. The gas observation mode is the same. In order to adapt to the harsh working environment in the wild, the instrument is designed with a three-level power surge protection overvoltage protection circuit.
The CO2 detector uses a dual-beam infrared CO2 sensor, which is a compact infrared gas sensor that combines mature infrared absorption gas detection technology with micro-machining and sophisticated circuit design. The CO2 detector also has a function of temperature compensation, which is less dependent on oxygen. It can be used in various places where carbon dioxide gas is present. It has a wide range of applications and is versatile. Intelligent, low-maintenance, low-cost, long-life instrument.
It is mainly used to clean the air passage, oil passage, water passage and exterior of cylinder head (cylinder block) after machining line, air drying, and remove chips and waste oil. In the process of cleaning the workpiece, there is no need for manual assistance, and it moves forward to the end of the cleaning step in turn (there are two workpieces in each workstation during the cleaning process).
Cylinder Washing Machine,Cylinder Cleaning Device,Fully Automatic Cleaning Device,Double-Station Cylinder Cleaning Machine
Shandong ShengKaiYuan Intelligent Technology Co.Ltd , http://www.cncastmachine.com