The rapid development of the automobile industry in Guangdong has also brought great opportunities and challenges to the rapid development of auto parts companies in Shaoguan. Strong industrial foundation, mechanical equipment, transmission and other industries have a certain advantage, but because it is far from the vehicle OEM factory, parts and components supporting companies become weak links, how to strengthen and enlarge the automotive parts companies, is to make Shaoguan The key to the integration of auto parts companies into the automotive industry chain in Guangdong.
The current situation of parts and components companies is weak
Shaoguan is the old industrial base of Guangdong. In the early 1980s, Shaoguan and Liuzhou started at the same time and became two industrial bases in Guangdong and Guangxi respectively. Today, Liuzhou owns two automakers, Wuling and Dongfeng Liuzhou. Since then, Shaoguan has transformed itself from building automotive manufacturing bases in the early 1980s to becoming a base for building equipment and components.
“Others say that from the parts and components to the development of the vehicle, but we are developing from the vehicle to the parts.†Li Dunhua, executive deputy director of the Guanlan High-tech Zone and Guanlan Industrial Park, said with regret: “In the early 1980s, Shaoguan used to produce vehicles from the north of Guangdong Province, but due to historical reasons and the lack of a market, it was replaced by parts. Even if it was a parts base, it was far from other cities, such as Guangzhou and Foshan. It was harder than other cities. There are advantages, lack of power, and stagnation in development, and now there are 10 fingertips, and there are 10 parts and components companies that pay more than 10 million in taxes. Although after several years of deepening reforms, the company’s own strength can be improved, but its competitiveness is still weak. Auto parts products cannot adapt to market changes in their structure, and there are few high-value-added products with distinctive features and advantages.Failure in funds and insufficient actual investment have resulted in the slow renewal of advanced technologies and equipment for parts production, and the development has been hindered."
The reporter learned from the investigation in Shaoguan that most of the auto parts enterprises in the city are scattered in the industry, the production scale is small, the operating variety is single, the product quality is not high, the technology is low, and the supporting facilities are backward. Three supporting suppliers. The dominant components are mainly concentrated in traditional and small parts products, and they do not have competitive advantages in high value-added parts and components. "Disperse, weak, and single-playing" itself limits the speed and effectiveness of its development. Most of the parts and components companies in Shaoguan are restructured after the reorganization of institutions, resources, and products. These parts and components companies are facing unprecedented pressure and competition.
Development raises equipment manufacturing to high business card
After summing up the experience, you need to find the direction to continue. Li Dunhua told the reporter: “The machinery industry in Shaoguan is an advantage. Shaoguan's foundry was the earliest start in Guangdong. In Shaoguan, there are many talents in the foundry industry, and there are hundreds of foundries in size. The special steel produced by Handan Iron and Steel Co., Ltd. The foundry is good.The quality of the special steel is guaranteed, and various abrasive products can be derived.In addition, the special steel can provide raw materials for the motor vehicles.The Zhuanguan casting and forging basic technology reserves have advantages in the talent reserve,especially in the transmissions of Shaoguan. With its own advantages, hydraulic power plants, gear factories, and bearing factories enjoy a high reputation both at home and abroad, and even though they are late in their development, the integration of automobile parts and components is good and they can also seek a good development path. It is necessary to highlight key points and seize the development of core components and core technologies."
According to reports, Shaoguan has certain advantages in the development of the machinery and equipment manufacturing industry. At present, more than 100 machinery and equipment enterprises above the designated size have developed to more than 100, and the total industrial output value is over 17 billion yuan, and most of them are clustered in the Dongguan Garden. Automobile spare parts, hydraulic cylinders, power distribution equipment, construction machinery and other industries have shown advantages. Li Dunhua said: "We will launch a forum for equipment manufacturing industry to upgrade equipment manufacturing to a business card for Shaoguan. We will use the advantages of equipment manufacturing industry to do a good job of driving transmissions, promote discounts on platforms, finance, and policies to attract BYD electric forklifts. Etc."
Conceived to build the headquarters of the Guangdong Equipment Manufacturing Industry
According to Li Dunhua, the park is implementing two major development strategies for the introduction and promotion of BYD Auto Co., Ltd. Shaoguan auto parts base as a leader, to strengthen cooperation with domestic and foreign auto manufacturers, strengthen the extension of the industrial chain, the development of new products for auto parts , New technologies, and strive to achieve breakthroughs in the development or introduction of production technology for key components such as automotive engines, transmissions, and chassis, and to master a number of key manufacturing technologies for special automobiles and parts with independent intellectual property rights. Strengthen cooperation with domestic and foreign automobile manufacturers and R&D institutions, continue to improve the quality of automotive transmission assemblies, gears, bearings, wheel rims, brake pads, bearings, powder metallurgy parts, etc., and build major domestic automotive hub bearings. R & D and production bases and important auto parts processing bases.
It is understood that the overall objective of Wanlan Park is to build the park as a headquarters base of Guangdong's equipment manufacturing industry featuring auto parts, smart sets of equipment and light industry-specific equipment, becoming the most important mechanical equipment industry cluster in South China. one. Among them, in the automobile industry field, the park will strive to build 2-3 billion-dollar equipment manufacturing industry clusters around auto parts, smart complete sets of equipment, and light industrial machinery equipment, and strive to create a 50-billion-level industrial park by 2020. Equipment manufacturing industry base.
Continuous Waste Tyre Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.
Flowchat of Continuous Waste Tyre Pyrolysis Plant
Advantages of Continuous Waste Tyre Pyrolysis Plant
1. Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Technical Parameter of Continuous Waste Tyre Pyrolysis Plant
|
NO. |
ITEM |
Technical Parameter |
|
1 |
Suitable Raw Materials |
Small pieces of Waste tyre,rubber, waste plastic≤5cm |
|
2 |
Operating Mode |
Fully Continuous Operation |
|
3 |
Structure |
Horizontal Type Revolve |
|
4 |
Loading and discharging |
Fully Automatic Feeding and Discharging under High Temperature at Same Time |
|
5 |
Capacity(24h) |
8-20Mt |
|
6 |
Work Pressure |
Slightly Negative Pressure |
|
7 |
Oil Yield of tyres |
40%-45% |
|
8 |
Reactor Rotational Speed |
1R/M |
|
9 |
Installation Power |
110kw |
|
10 |
Cooling Method |
Cycle water |
|
11 |
Type of Drive |
Sprocket Wheel |
|
12 |
Heating Method |
Hot Air |
|
13 |
Noise dB(A) |
≤85 |
|
14 |
Main Reactor Weight (MT) |
About 20Mt |
|
15 |
Total Weight(MT) |
About 45Mt |
|
16 |
Installation Space Required |
60m*20m |
|
17 |
Manpower |
2/shift |
|
18 |
Shipment |
5*40HC |
|
19 |
Delivery time |
≤70Days |
Continuous Waste Tyre Pyrolysis Plant
Continuous Pyrolysis ,Continuous Pyrolysis Plant,Continuous Waste Tyre Recycling,Waste Tyre To Oil
Shangqiu Jinpeng Industrial Co., Ltd. , http://www.recyclings.nl