We know that any product will have a lifetime, regardless of the length of life, if not properly maintained, it can only be a shorter life span. The commonly used float level gauge also needs to be maintained, although it is the same as the magnetic flap level gauge, it is convenient and simple to install and maintain compared to other level gauges, but it is also the basic work and must be standardized.
Under normal circumstances, the regular maintenance of factory equipment should be categorized into the contents of the workshop responsibility system. We must do a planned regular preventive inspection for the periodic inspection of floating ball level gauges . For example, periodically check the indicators.
How to check, some people say that the float level gauge is loaded into the tank, but it is plug-in. The float is inside the tank. How can this be maintained? Do you want to open the tank and take it out?
Â
This of course does not need to, this is the advantage of these two liquid level gauges, under normal circumstances, in the case of correct operation, the float does not require maintenance. At least 3 years do not require maintenance. If the medium is special, such as more viscous, or more impurities, it can be easily maintained, directly took off the flange out of the float on it.
Daily maintenance, only need to observe and record the parameters, observe whether the measured liquid level and the actual liquid level are approximately the same, observe the level indication whether there is any problem, if the recording parameter is no problem, even if it is maintained. Because if you really want to clean it is not desirable and it is not practical, it would be very troublesome. Also here to take out the re-put into the measurement that may affect the float level gauge. Moreover, it does not require maintenance on its own, so only regular observations and records are needed.
Â
Check Valve
Hot Sales Valves,Butterfly Valve,Ball Valve,Check Valve
Ball valve,Butterfly valve Co., Ltd. , http://www.nbbvalves.com