Existing idle capacity accounted for 3.6% of the total capacity of active service, which means that about 1% of capacity returned to the market in two weeks. As of March 29, a total of 290 container vessels were idle. The 290 vessels included both short-term idle capacity of 5 to 24 days and idle capacity of more than 25 days.
Market highlights last week were none other than the “Maersk Evoraâ€. The 2011, 13,100 teu container vessel was re-launched after being idle for more than 45 days in Klang (Port Klang, Malaysia) and is expected to arrive from Qingdao Port next month. The cargo was re-operated on a new route.
The "MaerskEvora" is the only containership with more than 13,000teu in the idle list of Loweer Intelligence Containerships. It is the only idle capacity container, which means that the remaining idle capacity no longer exceeds 13, 000teu figure of a container ship.
Previously, the container ship brokerage firm continued to report that the chartered market may erupt again in the spring. At this time, Lloyd's Intelligence's idle capacity data was undoubtedly reflected in the forecast of the former. On Thursday (29th), the ConTex Index of the Hamburg Shipowners Association (HSA) rose by 7 points in three weeks, and the quotation for the 24-month rental of 1,700teu container ships with spreaders was 6, USD 621/day, up by USD 131/day from three weeks ago, has become the leader of the rise.
Recently, some shipowners have announced new routes, including Hanjin Shipping and COSCO, respectively, which recently announced that they will open the Far East to Gulf of Mexico route by the end of April. The route will invest 8 4,000teu container vessels. Affected by this, the market's more idle capacity will be diluted.
According to Lloyd's Intelligence data, 37 of the idle capacity are currently 3,000teu to 4,999teu container ships, so the potential capacity demand in the future will be favorable to this part of the capacity.
(Xu Wei)
The grinder is widely used in medicine, chemical industry, pesticide, food and grain industry. The crusher utilizes the high-speed relative motion between the movable and fixed teeth to crush the crushed material through the combined action of tooth impact, friction and impact between the crushed materials. The machine has simple structure, ruggedness, smooth operation and good crushing effect. The crushed material can be discharged directly from the grinding chamber of the machine. The size of the particle can be obtained by replacing the screen with different apertures.
Matters needing attention
1, check whether there is a foreign body in the crushing cavity (before opening the machine must be empty), and connect the power supply.
2. Tighten the butterfly nut of the upper cover and the crushing chamber.
3. Start the motor, turn the air machine for 1-2 minutes, then gradually feed the beaten material from the feeding tray, the feeding should not be too fast and excessive.
4. If the material is stuck and the motor does not turn, please close it immediately so as not to burn the motor. After the stuck material is removed, it can be used again.
5. During the use of the machine, it is forbidden to open the upper cover and extend the hand into the crushing cavity.
6, the machine is a dry grinder, and it is not suitable to crush wet matter and greasy matter.
7. Users are required to replace different screens.
8. This machine adopts overheat protector. If the load of the motor is too large, it will stop automatically. If you continue to operate, please press the protector again.
Crushing Series,Rock Crushing Plant,Crushing Mining Equipments,Impact Crushing Equipment
Changzhou Su Li drying equipment Co., Ltd. , http://www.sldrying.com