Address:Room 1713, Asia Pacific Plaza, No. 18 Zhaofeng road,                                                                                Huaqiao CBD, Kunshan, Jiangsu
                                                                  Tel:86-512-50339036   Fax:86-512-50339036  Mob:86-18118430187
                                                       Web:www.rsm-machinery.com
Contact Person:Irene Sue
Â
                                                                  Grinding Machine
   Our easy-to-use touch screen interface, powerful high-output motor and ability to accept any tooling style, keeping your tooling in optimal condition had never been easier.
TECHNICAL SPECIFICATIONS
Model | Â | Â Â Â Â Â Â Â Â Â Â HR-160 | Â | Â | Â |
Net weight | Â | Â Â Â Â Â Â Â Â Â Â 600kg | Â | Â | Â |
 |  |  |  |  |  |
GRINDING WHEEL: | Â | Â | Â | Â | Â |
Grinding wheel type | Â | Â Â Â Â Â Â Â Â Â Â Â CBN | Â | Â | Â |
Grinding wheel dia | Â | Â Â Â Â Â Â Â Â Â Â Â 7.874"(200,00mm) | Â | Â | Â |
Rotary Table dia | Â | Â Â Â Â Â Â Â Â Â Â Â 12.600''(320,04mm) | Â | Â | Â |
Maximum grind height | Â | Â | 11.811''(300,00mm) | Â | Â |
Shear angle capability |  |  |  0°- 12° |  |  |
Minimum Punch Dia | Â | Â | 0.031''(0.80mm) | Â | Â |
Maximum Tool Dia | Â | Â | 7.50''(190.50mm) | Â | Â |
Noise level |  |  | ≤67dB(A) |  |  |
 |  |  |  |  |  |
GRINDING MOTOR(*machine adjusts to power supply | Â | Â | Â | Â | Â |
within specified range below) | Â | Â | Â | Â | Â |
Power | Â | Â | 3.0kW | Â | Â |
Voltage |  |  | US-440V-480V 3P 60HZ |  |  |
 |  |  | EU-400V 3P 50HZ |  |  |
Grinding motor RPM | Â | Â | US-3440 at 60 HZ+/-10% | Â | Â |
 |  |  | EU-2820 at 50 HZ+/-10% |  |  |
COOLANT SYSTEM | Â | Â | Â | Â | Â |
Coolant pump power | Â | Â | 120W | Â | Â |
Coolant pump flow rate |  |  | 13 gallons(50 liters) per |  |  |
 |  |  | minute minimum |  |  |
Coolant reservoir capacity | Â | Â | 10.5 gallons(40 liters) | Â | Â |
Machine height | Â | Â | Approx. 76.5''(1943mm) | Â | Â |
Machine width | Â | Â | Approx. 30''(762mm) | Â | Â |
Machine depth | Â | Â | Approx. 26''(660mm) | Â | Â |
Features:
1.Touch-screen interface simplifies all set-up and maintenance operations.Supports multiple language and units of measure.Easily updateable software via USB port and SD card.
2.Data tracking-Number of punch press tools sharpened,wheel and coolant life, motor life and more. Predictive wheel replacement warning.
3.Solid-surface 7.8''(200mm)CBN grinding wheel optimizes performance. Eliminating the perpendicular solts directly translates to a longer-lasting wheel.
4.Innovative design allows automatic coolant flow directly through the grinding wheel.5.On screen alerts/warnings for "Add Coolant"(low coolant) and "change filter"(high coolant).
Easy operation:
1.Ideal for unsupervised operation, just press"Start grinding" and the machine will sharpen the tool without assistance.
2.Light signals when current sharpening cycle is finished no need to wait by machine.
3.Store multiple programs to ensure consistency no matter who operates the machine.4.Powerful 3.0kw motor can handle the largest tools.
This series production line is designed for extrusion of PVC plastic window&door, cross-section cable duct, aluminum-plastic composite profiles and etc. The extruder adopts AC variable frequency or DC speed regulation drive, imported brand temperature controller.
The calibration vacuum pump and haul off motor are famous brand products. Maintenance is easy. After changing of the die and screw, is also can produce the Synthetic wood foam profiles better than Single Screw Extruder performance and advantage.
The extrusion lines consists of KRSJ twin Conical Screw Extruder and KRSJ single screw extruder, equipped with corresponding MSYF-seried profile auxiliary accessories and moulds, the following products can be produced: PVC/PP/PE plastic & wood profile, plastic & wood sheet , foamed profile, panels and others.
Working flow
KRSJ Series Conical Twin Screw Extruder→ Die Mould → Vacuum Calibration Table → KR series Haul-offs and Cutting Machine Unite →DKRF series Stacker → Control cabinet
(Note: Other Auxiliary Machine, such as crusher, mixer, will be provided according to client's requirements)
Doors & Windows Series Profile Extrusion Line
Windows Profile Extrusion Line,Doors Profile Extrusion Line,Pvc Windows Profile,Pvc Doors Profile
KonRun Extrusion Machinery Technology (Ningbo) Co., Ltd. , https://www.konrunmachine.com