Extrusion Line Recycle Plastic Granules Making Machine Price

  • Model NO.: SL
  • Plastic Processed: Polystyrene
  • Feeding Mode: One Feed
  • Screw: Single-Screw
  • Screw Channel Structure: Deep Screw
  • Automation: Automatic
  • Condition: New
  • Treatment of Screw: 38crmoaia
  • Transport Package: Suitable to Export
  • Origin: Wenzhou
  • Type: Yarn Extruder
  • Product Type: Extrusion Molding Machine
  • Assembly Structure: Integral Type Extruder
  • Engagement System: Full Intermeshing
  • Exhaust: Don′t Exhaust
  • Computerized: Computerized
  • Exprerience: 20years
  • Trademark: SL
  • Specification: ISO9001 and ISO14001
  • HS Code: 8477209000
PP Plastic Tape Extruding/ Extrusion Production Line Machine
(SL -FS120/1200B)

The machine using material of PP, PE as raw materials which should been heated, extruded, cooled, cut & drawn to the flat fibers. The flat fibers would be rolled on the bobbins for weaving the sacks by the circular loom. The flat fibers can be drawn by the materials is including of the reclaimed materials, powder or pellet materials and the mixed materials of them. In this case, the suitable range of the materials has been extended more. Then machine unit can save the power consumptions. It's quite convenience for operating & maintenance of the machine unit.
The cylinder & screw of the extruder are made by alloy steel of 38CrMoAlA. After nitrogenation treatment; Its hardness is much higher than HV950.
The extruder and drawing devices are controlled by step less speed charge device. Since all the drawing rollers had been treated by electroplating with the hard Chromium, so their service lives had been extended much longer.

Main technical parameters
Model No. SL -FS
110/800B 		 SL -FS
120/1000B		 SJ-FS 120/1200B SL -FS
135/1600B		 SL -FS
135/1800B		 SL -FS
140/2000B		 SL -FS
140/2200B		 SJ-FS 150/2600B SJ-FS 150/3000B SJ-FS 150/3200B
Diameter of Screw (mm) 110 120 120 135 135 140 140 160 160 160
L/D ratio of Screw 23:1 23:1 23:1 26:1 26:1 26:1 26:1 28:1 28:1 28:1
Rotational Speed of Screw (r/min) 25-75 23-70 23-70 22-65 22-65 20-60 20-60 20-60 20-60 20-60
Width of Die (mm) 800 1000 1200 1600 1800 2000 2200 2600 3000 3200
Motor Power of Extruder (kw) 30 30 30 37 37 45 45 75 75 75
Heating Power of Extruder (kw) 36 43 47 77 77 86 86 96 100 100
Power of Driving Motor (kw) 7.5 7.5 7.5 11 11 11 11 18.5 22 22
Heating Power of the Oven (kw) 15 20 24 30 30 30 30 32 34 34
Drawing
Rate		 4-8 4-8 4-8 4-8 4-8 4-8 4-8 4-8 4-8 4-8
number of oven 2 2 2 2 2 2 2 2 2 2
Thickness of Tape (mm) 0.025-0.08 0.025-0.08 0.025-0.08 0.025-0.06 0.025-0.06 0.025-0.06 0.025-0.06 0.025-0.06 0.025-0.06 0.025-0.06
Production Capacity (kg/h) 50-100 60-120 70-140 90-180 100-200 110-220 120-240 120-260 140-280 140-280
Drawing speed(m/min) 80-200 80-200 80-200 80-200 80-200 80-200 80-200 80-200 80-200 80-200
Weight   (kg) 6500 8000 10000 16000 17000 20000 21500 24500 26500 27500
Installing Dimensions (L*W*H) (mm) 13300
×1500
×2000		 14700
×1750
×2000		 16500
×2050
×2000		 17200
×2600
×2200		 19000
×2950
×2200		 19200
×3400
×2200		 19200
×3700
×2200		 20500 ×4400 ×2500 20500 ×4800 ×2500 20500 ×5000 ×2500

Factory Show:
Extrusion Line Recycle Plastic Granules Making Machine Price

Large Area Perfume Diffuser can pure the air and give you the fresh environment. Our large area perfume diffuser is ideal for bank, mall, hospital,KTV,SPA,office and so on.Such as Commercial Scent Machine.


Our Electric Scent Diffuser applied advanced Atomization technology and special molded atomization head , essential oils are atomized into very small nanosized mist particles. Unlike heavier aerosol droplets which fall to the floor or other surfaces within minutes, ours are much smaller and lighter behave like a [dry" gas remaining airborne for several hours, blending uniformly throughout an interior space and without leaving


Large Area Perfume Diffuser

Large Area Perfume Diffuser, Commercial Scent Machine,Fragrance Diffuser

NINGBO LUBAN ELECTRIC POWER TOOLS CO.,LTD. , http://www.aye-group.com

Posted on