Model NO.: G-001
Thread Position of Valve Rod: Inside Gate Valve
Usage: Flow Control
Standard: DIN
Application: Industrial Usage, Water Industrial Usage
Size: Dn50-Dn2000
Trademark: TFW
Transport Package: Plywood Case
Specification: CE
Origin: Tianjin China
HS Code: 84818040
Model NO.: G-001
Thread Position of Valve Rod: Inside Gate Valve
Usage: Flow Control
Standard: DIN
Application: Industrial Usage, Water Industrial Usage
Size: Dn50-Dn2000
Trademark: TFW
Transport Package: Plywood Case
Specification: CE
Origin: Tianjin China
HS Code: 84818040
DIN3352 Resilient Seated Gate Valve, DIN3202 F4, Flanged Ends, Non-Rising Stem, PN10/16.1) Product information: The gate valves supplied are mainly used for adjusting water,
Steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: Flanged type, push-on type, mechanical joint type, plain ends
Type, PVC socket
4) Material:
A) Body: Ductile iron
B) Wedge: Ductile iron, core fully vulcanized with NBR or EPDM rubber
C) Wedge nut: Brass
D) Stem: Stainless steel, BS970 431S29 or DIN17440 X 20Cr13
E) Gasket: NBR
F) Bonnet: Ductile iron
G) O-ring: NBR
H) Washer: Carbon steel or stainless steel
5) Size: 50-600mm/2" - 24"
6) Pressure rate: PN10, PN16
7) Coating:
A) Fusion-bonded epoxy 200-250 microns inside and outside
B) Coating as per customers' requirement
Â
NO. | PART | MATERIAL |
1 | Body | Ductile Iron |
2 | Seat | EPDM |
3 | Shaft | Stainless steel 420 |
4 | Disc | Ductile Iron |
5 | Wedge Nut | Brass |
6 | Bonnet | Ductile Iron |
7 | O ring | EPDM |
8 | Thrust ring | Brass |
9 | sealing ring | EPDM |
10 | socket head screw | Carbon Steel |
11 | O ring | EPDM |
12 | Hand wheel | Ductile Iron |
13 | Stem Nut | Brass |
 DIN3352 Resilient Seated Gate Valve, DIN3202 F4, Flanged Ends, Non-Rising Stem, PN10/16.
1) Product information: The gate valves supplied are mainly used for adjusting water,
Steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: Flanged type, push-on type, mechanical joint type, plain ends
Type, PVC socket
4) Material:
A) Body: Ductile iron
B) Wedge: Ductile iron, core fully vulcanized with NBR or EPDM rubber
C) Wedge nut: Brass
D) Stem: Stainless steel, BS970 431S29 or DIN17440 X 20Cr13
E) Gasket: NBR
F) Bonnet: Ductile iron
G) O-ring: NBR
H) Washer: Carbon steel or stainless steel
5) Size: 50-600mm/2" - 24"
6) Pressure rate: PN10, PN16
7) Coating:
A) Fusion-bonded epoxy 200-250 microns inside and outside
B) Coating as per customers' requirement
Â
NO. | PART | MATERIAL |
1 | Body | Ductile Iron |
2 | Seat | EPDM |
3 | Shaft | Stainless steel 420 |
4 | Disc | Ductile Iron |
5 | Wedge Nut | Brass |
6 | Bonnet | Ductile Iron |
7 | O ring | EPDM |
8 | Thrust ring | Brass |
9 | sealing ring | EPDM |
10 | socket head screw | Carbon Steel |
11 | O ring | EPDM |
12 | Hand wheel | Ductile Iron |
13 | Stem Nut | Brass |
Â
Automobiles play the important role in modern life. There is a huge demand market in China. Our company can manufacture most Automobile Plastic components, including screen frame,intelligent trunk detection system box and other high quality Plastic Injection Parts. We already pass the strict vendor audit and become one of stable suppliers of some famous auto bands, for example Volkswagen, Honda, Toyota etc.
Automobile Plastic Accessories
Automobile Plastic,Molded Car Parts,Plastic Injection Mould For Automobile Parts,Mould For Car Parts
KUNSHAN YSL PRECISION MOULD CO.,LTD , https://www.yslprecisonmould.com