Do you work with steel in your manufacturing facility? Whether it's turnings, chips, filings, shavings, cuttings, sawdust, drillings, borings, debris, granules or sludge, a steel briquette machine from ShengBo is the solution. Steel briquetting can double the value you get, cause steel briquettes are easier to manage, transport, sell and recycle. It can also squeeze out the liquids from your scraps.
We recommend you a fully-automatic steel briquetting line, with conveyor, bunker, elevator, etc. Our Y83W horizontal briquette machine has advantages as follows:
1) scraps length can be less than 10cm.
2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips, etc.
3) make storage area clean and green.
4) much lower than vertical one, suit the workshop with low height.
5) high output.
Â
model | Y83W-5000 |
nominal force | 5000kn |
briquette diameter | D120 (customized) |
briquette density | ≥ 5.5t/m³ |
briquette weight | 5~7kg |
productivity | 3block/min |
output in one shift | 8~10t/8h |
total power | 30kw*2 |
machine weight | about 11ton |
overall dimension | host machine: 4500*2050*2350mm oil tank: 1950*1500*1360mm |
Â
: D
Do you work with steel in your manufacturing facility? Whether it's turnings, chips, filings, shavings, cuttings, sawdust, drillings, borings, debris, granules or sludge, a steel briquette machine from ShengBo is the solution. Steel briquetting can double the value you get, cause steel briquettes are easier to manage, transport, sell and recycle. It can also squeeze out the liquids from your scraps.
We recommend you a fully-automatic steel briquetting line, with conveyor, bunker, elevator, etc. Our Y83W horizontal briquette machine has advantages as follows:
1) scraps length can be less than 10cm.
2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips, etc.
3) make storage area clean and green.
4) much lower than vertical one, suit the workshop with low height.
5) high output.
Â
model | Y83W-5000 |
nominal force | 5000kn |
briquette diameter | D120 (customized) |
briquette density | ≥ 5.5t/m³ |
briquette weight | 5~7kg |
productivity | 3block/min |
output in one shift | 8~10t/8h |
total power | 30kw*2 |
machine weight | about 11ton |
overall dimension | host machine: 4500*2050*2350mm oil tank: 1950*1500*1360mm |
Â
: D
CNC fiber laser cutting manchine is cutting-table structure designed machine with dual drive, effctive cutting range is from 1500mm to 6000mm. High-precision longitudinal and transverse linear rails drive high-precision helical gear and rack and it is available in speed up to 8000mm/min. Accelerated speed is 1G. Exchanging work tables are optional that optimize cutting productivity.
Made in China CNC Fiber Laser Cutting Machine
1.Technical specifications of CNC fiber laser Cutting Machine
Effective cutting length: 3000mm
Effective cutting width:1500mm
Max. speed:10000mm/min(returning speed)
CNC system:FSCUT
Laser generator:RFL-1000(Domestic sharp branch)
Smoke purification device: CCQ-9000
Cutting torch: 1group( Cyplite )
Torch THC:BCS100,elevating distance≥100mm
2.cutting speed parameter of CNC fiber laser cutting machine
The laser power and the cutting material thickness under certain conditions,
cutting speed varies with the composition of the material, specifically the ability
of different sheet metal cutting table below (for reference).
|
thickness (mm) |
speed (mm/min) |
pressure (MPA) |
thickness (mm) |
speed (mm/min) |
pressure (MPA) |
1000W
|
1mm |
12000 |
0.6 |
1mm |
15000 |
1.6 |
2mm |
6000 |
0.6 |
2mm |
5400 |
2.0 |
|
3mm |
3600 |
0.5 |
3mm |
1800 |
2.3 |
|
4mm |
2700 |
0.4 |
4mm |
1100 |
2.5 |
|
6mm |
1200 |
0.15 |
|
|
|
|
8mm |
960 |
0.13 |
|
|
|
|
10mm |
600 |
0.13 |
|
|
|
3.RFL-1000 performance parameters of the fiber laser
parameter |
RFL-1000 |
rated input voltage |
220±10%VAC |
modulation frequency |
50kHZ |
wave length |
915nm |
laser power |
1000W |
power consumption |
<2kW |
Size (length X width X height) |
485mm X 237mm X 663mm |
weight |
<50Kg |
gas |
Air: 9 oxygen bar: 8 bar nitrogen: 27 bar |
CNC Fiber Laser Cutting Machine
CNC Fiber Laser Cutting Machine,CNC Fiber Laser Cutter,CNC Fiber Laser Cutting Machinery,CNC Fiber Laser Router
SHIJIAZHUANG LONGXUAN TRADING CO., LTD , http://www.longxuanmachine.com