The start of the main project for the start-up of peripheral equipment for the joint venture caustic soda project began to intensify construction

The reporter recently learned from Zhangzhou Lianyi Chemical that as of last month, the oil-fired boiler equipment, air compressor and nitrogen generator of Luzhou Lianyi Chemical Co., Ltd. had been successfully started. After testing, the two operating parameters of the process fully meet the design requirements.
It is reported that at present, other processes in the caustic soda section of the project have also been fully rolled out, and the process installation of the ion membrane electrolysis process has been completed 80%, and the installation of one time brine, hydrogen treatment, chlorine treatment, and circulating water has been completed more than 30%. Construction, equipment installation, process installation, and electrical installation have entered the overtime phase.
The company overcomes the difficulty of cross-construction of various specialties. Under the unified coordination of the engineering headquarters, the progress of each work is well-ordered. The Central Control Building was recently occupied by offices, and the design, construction and establishment departments have been concentrated in the Central Control Office.

Cleaning Agent:

The difference between organic cleaning agent and inorganic Cleaning Agent simply, cleaning agent cleaning agent is made of organic compounds containing carbon, cleaning agent made of inorganic compounds, cleaning agent is not containing carbon, therefore they belong to the inorganic. Classification method of cleaning agent is also a lot of countries are not the same, we usually divided into water, half water, non water cleaning agent three categories.

 

How to select a good cleaning agent:

The chemical stability, not easy to be cleaned and reacts; the surface tension and viscosity, strong penetration; the low boiling point, can be dry; there's no flash point, non flammable; the KB value should not be too high, not miscible with the material to be washed; the low toxicity, safe use; and non ODS and low GWP value (global warming potential), and environmental protection.

 

Application Requirement:

For chemical industrial cleaning, should meet the following requirements.

The cleaning agent used for cleaning purposes and different cleaning objects, can be emphasized or choice for these requirements. The dirt cleaning speed, dissolving dirt thoroughly. The cleaning agent itself has a strong reaction to the dirt, dispersed or dissolved scavenging capacity and in the limited time, can thoroughly remove dirt. The cleaning of the object damage should be in production license limits, and corresponding control measures for corrosion of metals may cause. The cleaning agent is cheap and easy to get, set foot on the localization; low cleaning cost, does not cause too much the consumption of resources. The cleaning agent on the biological and environmental non-toxic or low toxicity, the generated gas, waste water and waste residue, should be able to be disposed to comply with relevant state regulations. The cleaning condition is mild, try not to depend on the force of export The strengthening conditions, such as temperature, pressure, mechanical energy and does not require excessive requirements. Such as the cleaning process in the cleaning surface of the object remains insoluble, does not produce new stain, do not form a new harmful to the subsequent process of covering layer, does not affect the quality of the products. It does not affect the bubble and smell the cleaning process and on-site health.

Cleaning Agent


Cleaning Agent

Cleaning Agent,Washing Agents,Pcb Cleaning Agents,Cleaning Decoloring Agent

VESTA Motoring Ltd , http://www.vesta-industry.com

Posted on