The report proposes that the potential of the industry in saving annual energy expenditure is so great. Take the industry as an example. By using VSDs high-efficiency motors, a medium-sized company with an annual electricity charge of 50,000 pounds can save 5,000 pounds. Equipment such as fans and pumps do not always operate at full capacity. By using VSDs, 50% of energy consumption can be saved.
Motor energy consumption accounts for 2/3 of the UK's total electricity consumption, which accounts for about 40% of the world's electricity consumption. The annual operating cost of one motor is equivalent to the purchase cost of 10 motors.
The report of the Carbon Trust also pointed out that the UK food and beverage industry can save nearly 70 million pounds of expenditure annually through the installation of variable speed devices and high efficiency motors. Other industries such as plastics, rubber and chemicals can save up to 270 million pounds in annual expenditures.
The head of the carbon trust agency said that if the industry chooses the right motor and drive method, the cost savings can be up to 640 million pounds. Of course, it is sometimes easier to take a side view, but in fact a simple step can bring about tremendous changes. Adopting the measures in the report will directly affect the development of the industry.
Here are some of the highlights of the report:
1. Set the time point: Set the shutdown point for the motor-driven device at some specific time if the device does not need to be used.
2. Check motor idling: Observe whether the motor-driven equipment will idle when it is suspended or replaced.
3. Use VSDs technology: Reduce the fan or pump from 100% load to 80%, saving 50% of energy use.
4. Minimize system requirements: Carefully analyze requirements to minimize equipment output, such as temperature or pressure settings.
5, verify the performance of the entire system, so that each component is operating in the best condition, including:
(1) Make sure that the equipment is regularly checked: Clean the motor and auxiliary equipment regularly to remove dirt and impurities.
(2) Check the status of the motor to ensure proper installation and good heat dissipation conditions.
(3) Check if the motor and equipment are in balance and the pulley is tight.
(4) Observe regularly and check whether the sound is normal and whether it leaks oil.
(5) Use suitable lubricants and replace them regularly.
TENT AIR CONDITIONER (MOBILE COOLING & HEATING AIR CONDITIONER)
Mobile tent air conditioner is a mobile air conditioning unit developed primarily to provide air conditioning in tents, campings, temporary or transportable buildings, or similar fields. To improve the working or living conditions, tent air conditioners, including military use tent air conditioner, mobile field hospital air conditioner, relief air conditioner, etc
The unit is designed for outside installation with ducted supply and return air. The function is based on a cooling circuit and two powerful fans. The evaporator section contains the evaporator and a radial fan which draws warm internal air through the cold evaporator and blows out the cooled air through the side of the unit. The condenser section contains two condenser coils and a large axial fan returning the heat from the internal air to the outside. Heating function is also available by an opposite circuit.
Features:
1) Wheel Kit
Four-wheel kits are equipped as a basic add-on-solution which make the unit to be applied on site without using any tools. The unit can be transported and moved to the optimal position by one or two people easily. The wheel solution enables rapid and easy deployment of the unit but no need forklift sometimes.
2) Flexible installation
All mobile tent air conditioners are easy to adapt to local conditions. The units can be placed outside of the tents, while they can also be placed half inside and half outside. In order to optimize the cooling effect, the units - as well as the ducts - are better to be placed close to the tent with ducts as short as possible on the outside to minimize solar radiation. Solar shielding of the cooling unit and ducts will further increase performance.
3) Heating and cooling from the same unit
The mobile tent cooling and heating units can also be supplied with a built-in heat function. This makes these units especially useful in geographical areas with extreme differences in daytime and night-time temperatures, such as deserts. Extra electric heating accessories are available to ensure the heating performance.
4) Wide Applications
Working area: Tents, Temporary buildings, Accommodation, Military camps, Relief camps, Workcamps (oil and gas industry), Vehicle cabins, Granaries, Event cooling and heating, Emergency cooling, etc
Working Temperature: It can provide cooling at ambient temperatures up to +60℃, and heating down to -15℃.
Our Service:
1. OEM Service is available;
2. Customized design is available;
3. Fast delivery time.
Sincerely hope to cooperate with partners from all over the world.
Mobile Tent Air Conditioner,Mobile Cooling and Heating,Tent Air Conditioning Units,Camping Tent Air Conditioner,Portable Tent Air Conditioner
Taizhou Tentcool Electrical Appliance Co., Ltd. , https://www.tentcool.com