Â
1) Product information: the gate valves supplied are mainly used for adjusting water, steam, oil, gas, and natural gas in chemical industries
2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150
3) Connection type: flanged type, push-on type, mechanical joint type, plain ends type
4) Material:
a) Body : Ductile Iron GGG500-7
b) Wedge : D/I , core fully vulcanized with NBR or EPDM rubber
c) Wedge Nut : Brass
d) Stem : Stainless steel , BS970 431S29 or DIN17440x20Cr13
e) Gasket : NBR
f) Bonnet : GGG500-7
g) O ring : NBR
h) Washer : Carbon steel or Stainless steel .
5) Size: 50-400mm/2" - 16"
6) Pressure grade: PN10, PN16
7) Coating:
a) Fusion-bonded epoxy 200-250 microns inside and out side
b) Coating as per customers' requirement
8) Package : carton for each item , wooden boxes outside .
No. | ||
1 |
Body |
Ductile cast iron |
2 |
Disc |
Ductile cast iron packed with NBR |
3 |
Bolt |
CS SS |
4 |
Gasket |
EPDM NBR |
5 |
Cover |
ductile cast iron |
6 |
Stem |
stainless steel |
7 |
O-ring |
EPDM Silicone |
8 |
Thrust bearing |
Brass |
9 |
Bolt |
CS SS |
10 |
Gland |
ductile cast iron |
11 |
Dust proof gasket |
EPDM/NBR |
12 |
Hand wheel |
Ductile cast iron |
Â
1. Product catalogue:
2.BCT CustomersÂ
Â
Â
4.Inspection and test
Â
5.Packing
Â
6.Installation and application
Â
Â
Â
Our Force Control System, grinding active contact flange, Grinding Constant Force Actuator usually work together with Grinder and Industrial Robot. Industrial robot controls the moving path, and force control system controls the force magnitude and position. The whole system have flexible control, quick response and instant adjusting characters. It will improve the grinding accuracy and can help realize automation mass production.
Force Control System
Grinding force control system, grinding active contact flange, grinding constant force actuator
DARU Technology (Suzhou) Co., Ltd. , https://www.daruacf.com