Industrial Laser Cutting Machine Cutting Stainless Steel 1-10mm

Model NO.: GS-LFDS3015
Laser Technology: Laser Control Fault Cutting
Power Source: Fiber Laser
Control Mode: CNC
Cutting Nozzle: Ring Type
Graphic Format: Dwg,Dxf
Cooling Mode: Water Cooling
Applicable: Metal
Laser Type: Fiber Laser
Trademark: Hansgs
Transport Package: Plywood Cases
Specification: CE, ISO, SGS, CS etc.
Origin: Wuhan, China
HS Code: 8456100090
Model NO.: GS-LFDS3015
Laser Technology: Laser Control Fault Cutting
Power Source: Fiber Laser
Control Mode: CNC
Cutting Nozzle: Ring Type
Graphic Format: Dwg,Dxf
Cooling Mode: Water Cooling
Applicable: Metal
Laser Type: Fiber Laser
Trademark: Hansgs
Transport Package: Plywood Cases
Specification: CE, ISO, SGS, CS etc.
Origin: Wuhan, China
HS Code: 8456100090

Industrial Laser Cutting Machine Cutting Stainless Steel 1-10mm
Laser cutting advantages over other thermal cutting methods

1. The cutting quality is good: 
Because of the small laser spot, high energy density, fast cutting speed, laser cutting can therefore get better cutting quality.
(1) Cutting knife is narrow and parallel on both sides, also perpendicular to surface, dimensional accuracy of cutting pieces can be up to + / - 0.05 mm.
(2) Cutting surface is smooth and beautiful, the surface roughness is only a few dozen microns, laser cutting can be used as the final working procedure, parts can be even used directly without mechanical processing.
(3) Heat affected zone is very small, material performance is hardly affected near the kerf width , and the workpiece deformation is small. Also, kerf geometry is good , slitting rectangular cross-section shapes appear to be regular.
 
2. Highly automation:
Adopts digital control, you only need to use CAD to draw the picture and import to specialized software, laser cutting machine can cut out the artifacts you need, moreover there is intelligent typesetting function, thus can save raw material costs to the greatest extent.
 
3. High cutting efficiency:
Due to the transmission properties of laser, laser cutting machine has equipped with many sets of CNC work bench to realize numerical control. You only need to change the CNC program to cut different shape, as well as for two-dimensional cutting, and three-dimensional cutting.
 
4. Fast cutting speed
 
5. Non-contact cutting
 
6. Variety cutting material


Parameters
 
Model GS-LFDS3015 GS-LFDS4020 GS-LFDS6020
Laser source medium Fiber
Cutting range(L*W)  3000mm × 1500mm 4000mm × 2000mm 6000mm × 2000mm
Z axle stroke 250 mm
Max positioning speed 120m/min
X,X,Y axle Max accelerate speed
 		 1.2G
Cooling form water cooling
Laser wavelength 1070nm
Output power of laser source 1000W~ 4000W(imported)
Min. cutting gap ≤0.1mm
Positioning accuracy of X, Y and Z axles ±0.03 mm
Repeated positioning  accuracy of X, Y and Z axles ±0.01mm
Thickness of cutting material
(according to material) 		0.2-25mm
Drive model Imported servo motor
Power requirement 380V,50/60Hz
Working temperature 5ºC-45ºC
Continuous working time 24 Hours
Machine weight About 11440Kgs
Outer dimension 8500mm x 3800mm x 2000mm
Total protection level of power supply IP54


View More

Industrial Laser Cutting Machine Cutting Stainless Steel 1-10mmIndustrial Laser Cutting Machine Cutting Stainless Steel 1-10mm
 

Functions of GS-LFDS3015 laser cutter

1. Excellent overall performance, changeable working tables, 7 seconds to finish high speed changing, improve working efficiency of more than 48%.
2. The machine tool includes loading area and processing area, standard configuration is changeable working tables, auto change the workpiece between processing area and loading area by motor, convenient to upload and download. With the design of changeable working table, could prepare the next uploading while processing, highly improved working efficiency.
3. Equipped with exhaust device, have good exhausting effect and little pollution.
4. Small occupied area, high system integration, convenient to operate and maintenance,24 hours continuous working.
5. The water chiller has good safety protection function, such as over temperature, lack phase, pressure, water-break, undervoltage, overload, etc. With stable performance, satisfied the cooling requirement of laser source.

Standard Configuration of GS-LFDS3015 Laser Cutter
 
NO. Item Qut. Manufacturer & Original place   
1 Laser Source
(1) 1000 - 4000W Fiber laser source 1 set IPG/Rofin/SPI
2 Cutting head and follow-up system
(1) Laser cutting head 1 set          Raytool (Switzerland)
(2) Follow-up system 1 set  Raytool (Switzerland)
3 Machine tool
(1) Cutting bed & accessories 1 set Hans GS
(2) X,Y,W-axis rack 1 set for each            Linden (Sweden)
    Accuracy: DIN 6h grade; Mill:3
(3) planetary gear reducer 1 set for each APEX(Taiwan)/Sober(Germany)
(4) Liner guider 1 set for each HIWIN (Taiwan)
(5) Machine tool accessories 1 set Hans GS

Han's Goldensky is the High power laser expert in China

Wuhan"Optics Valley" Core enterprise
Founded in 1998;Registered capital  is $13 million, Total assets  is $24.6 million
Han's Goldensky Science and technology park, the first phase of construction is 20000 square meters
Three products are included in The National Torch Plans Key projects list

Industrial Laser Cutting Machine Cutting Stainless Steel 1-10mmSaveSave

Industrial Laser Cutting Machine Cutting Stainless Steel 1-10mm
Laser cutting advantages over other thermal cutting methods

1. The cutting quality is good: 
Because of the small laser spot, high energy density, fast cutting speed, laser cutting can therefore get better cutting quality.
(1) Cutting knife is narrow and parallel on both sides, also perpendicular to surface, dimensional accuracy of cutting pieces can be up to + / - 0.05 mm.
(2) Cutting surface is smooth and beautiful, the surface roughness is only a few dozen microns, laser cutting can be used as the final working procedure, parts can be even used directly without mechanical processing.
(3) Heat affected zone is very small, material performance is hardly affected near the kerf width , and the workpiece deformation is small. Also, kerf geometry is good , slitting rectangular cross-section shapes appear to be regular.
 
2. Highly automation:
Adopts digital control, you only need to use CAD to draw the picture and import to specialized software, laser cutting machine can cut out the artifacts you need, moreover there is intelligent typesetting function, thus can save raw material costs to the greatest extent.
 
3. High cutting efficiency:
Due to the transmission properties of laser, laser cutting machine has equipped with many sets of CNC work bench to realize numerical control. You only need to change the CNC program to cut different shape, as well as for two-dimensional cutting, and three-dimensional cutting.
 
4. Fast cutting speed
 
5. Non-contact cutting
 
6. Variety cutting material


Parameters
 
Model GS-LFDS3015 GS-LFDS4020 GS-LFDS6020
Laser source medium Fiber
Cutting range(L*W)  3000mm × 1500mm 4000mm × 2000mm 6000mm × 2000mm
Z axle stroke 250 mm
Max positioning speed 120m/min
X,X,Y axle Max accelerate speed
 		 1.2G
Cooling form water cooling
Laser wavelength 1070nm
Output power of laser source 1000W~ 4000W(imported)
Min. cutting gap ≤0.1mm
Positioning accuracy of X, Y and Z axles ±0.03 mm
Repeated positioning  accuracy of X, Y and Z axles ±0.01mm
Thickness of cutting material
(according to material) 		0.2-25mm
Drive model Imported servo motor
Power requirement 380V,50/60Hz
Working temperature 5ºC-45ºC
Continuous working time 24 Hours
Machine weight About 11440Kgs
Outer dimension 8500mm x 3800mm x 2000mm
Total protection level of power supply IP54


View More

Industrial Laser Cutting Machine Cutting Stainless Steel 1-10mmIndustrial Laser Cutting Machine Cutting Stainless Steel 1-10mm
 

Functions of GS-LFDS3015 laser cutter

1. Excellent overall performance, changeable working tables, 7 seconds to finish high speed changing, improve working efficiency of more than 48%.
2. The machine tool includes loading area and processing area, standard configuration is changeable working tables, auto change the workpiece between processing area and loading area by motor, convenient to upload and download. With the design of changeable working table, could prepare the next uploading while processing, highly improved working efficiency.
3. Equipped with exhaust device, have good exhausting effect and little pollution.
4. Small occupied area, high system integration, convenient to operate and maintenance,24 hours continuous working.
5. The water chiller has good safety protection function, such as over temperature, lack phase, pressure, water-break, undervoltage, overload, etc. With stable performance, satisfied the cooling requirement of laser source.

Standard Configuration of GS-LFDS3015 Laser Cutter
 
NO. Item Qut. Manufacturer & Original place   
1 Laser Source
(1) 1000 - 4000W Fiber laser source 1 set IPG/Rofin/SPI
2 Cutting head and follow-up system
(1) Laser cutting head 1 set          Raytool (Switzerland)
(2) Follow-up system 1 set  Raytool (Switzerland)
3 Machine tool
(1) Cutting bed & accessories 1 set Hans GS
(2) X,Y,W-axis rack 1 set for each            Linden (Sweden)
    Accuracy: DIN 6h grade; Mill:3
(3) planetary gear reducer 1 set for each APEX(Taiwan)/Sober(Germany)
(4) Liner guider 1 set for each HIWIN (Taiwan)
(5) Machine tool accessories 1 set Hans GS

Han's Goldensky is the High power laser expert in China

Wuhan"Optics Valley" Core enterprise
Founded in 1998;Registered capital  is $13 million, Total assets  is $24.6 million
Han's Goldensky Science and technology park, the first phase of construction is 20000 square meters
Three products are included in The National Torch Plans Key projects list

Industrial Laser Cutting Machine Cutting Stainless Steel 1-10mmSaveSave

The duct fan is the duct fan, which uses high-speed rotation to exert pressure on the gas, so as to achieve the function of conveying gas. Duct Fans are widely used in industry, buildings, indoor ventilation or duct pressurization.

Duct Fans

Duct Fans

ZIBO SUNTAE GLOBAL IMPORT & EXPORT CO.,LTD , https://www.qinengfan.com

Posted on