Produce Outboard Motors:
Two-stroke: 3.5HP, 4HP, 5HP, 8HP, 9.8HP, 9.9HP, 15HP, 25HP, 30HP, 40HP, 60HP
Four-stroke: 2.5HP, 4HP, 5HP, 8HP, 9.9HP, 15HP, 25HP
FEATURES:
- High grade marine aluminum alloy for ultimate corrosion protection
- Tilt & trim with shallow water drive various positions
- Twist grip throttle control for easy maneuverability & safety
- Thermostat controlled water cooling system
- Safety lanyard with emergency shutoff
- Easy forward-neutral-reverse gear shifting
- Vibration reduction system for smooth performance
- Start in gear protection for increased safety
- Adjustable steering friction for easier maneuverability
- Excellent ignition system for trouble free starting
- Innovative large recoil wheel assists easy starting
- Quiet, through the propeller hub exhaust
Two-stroke: 3.5HP, 4HP, 5HP, 8HP, 9.8HP, 9.9HP, 15HP, 25HP, 30HP, 40HP, 60HP
Four-stroke: 2.5HP, 4HP, 5HP, 8HP, 9.9HP, 15HP, 25HP
FEATURES:
- High grade marine aluminum alloy for ultimate corrosion protection
- Tilt & trim with shallow water drive various positions
- Twist grip throttle control for easy maneuverability & safety
- Thermostat controlled water cooling system
- Safety lanyard with emergency shutoff
- Easy forward-neutral-reverse gear shifting
- Vibration reduction system for smooth performance
- Start in gear protection for increased safety
- Adjustable steering friction for easier maneuverability
- Excellent ignition system for trouble free starting
- Innovative large recoil wheel assists easy starting
- Quiet, through the propeller hub exhaust
Max. Output | 4HP (2.94 kw) |
Full Throttle Operating Range (rpm) | 4500-5500 |
Stroke | 1 |
Cylinder | 2 |
Displacement (cc) | 102 |
Bore × Stroke (mm) | 55x43 |
Length x Width x Height (mm) Motor | 700×300×1010(S) 700×300×1137 (L) |
Length x Width x Height (mm) Package | 1056x586x390(S)Â Â Â 1183x586x390(L) |
Net Weight (kg) | S:21Â L:23 |
Gross Weight(kg) (Packed Weight) | S:26Â L:26.5 |
Gear Ratio | 27:13 |
Gear Shift | F-N-R |
lgnition System | CDI |
Cooling System | Water cooling |
Starter System | Manual start |
Control System | Tiller |
Capacity of Fuel Tank (L) | 2.5 |
SLM Selective Laser Melting technology,Under the irradiation of high density laser energy, metal powders can be completely melted. After cooling, they can be shaped and welded. It is through this process that SLM technology forms the 3d model layer by layer.SLM technology can print stainless steel, die steel, cobalt chromium alloy, titanium alloy, aluminum alloy, copper alloy, nickel base alloy powder, etc.It can print metal parts with complex structure to help shorten product development cycle and reduce R & D cost.
Selective Laser Melting
Selective Laser Melting,Aluminum Alloy Engine Parts,Auto Engine Parts Customized,Selective Laser Melting 3D Printing
Ningbo Expert Mould Plastic Co., Ltd. , https://www.prototypesmaker.com