2015 5mm Wall Thickness Laser Cutting Machine Including Shipping Cost

Model NO.: 377

Cutting Area(mm)(LÃ—w): 3000mm 1500mm

Application: Machinery & Hardware

Cutting Depth: 0.2mm---8mm

Electrical Requirements: 380V/50Hz.60AMP

Trademark: Dapeng

Specification: SGS/CE

Origin: China Shenzhen

HS Code: 84561000

Model NO.: 377

Cutting Area(mm)(LÃ—w): 3000mm 1500mm

Application: Machinery & Hardware

Cutting Depth: 0.2mm---8mm

Electrical Requirements: 380V/50Hz.60AMP

Trademark: Dapeng

Specification: SGS/CE

Origin: China Shenzhen

HS Code: 84561000

2015 5mm wall thickness Laser Cutting Machine including shipping cost

DP FIBER LASER CUTTING ADVANTAGES:
1, Cost saving on power consumption/ only 20-30% of co2 laser cutting machine under same power.
2, Flexibility and precision cutting of simple or complex parts
3, Adopts imported world brand fiber laser/Life time over 100,000hrs
4, Imported servo motor and gearing system ensure precision cutting
5, High quality cut with no extra finishing required
6, Higher cutting speed and efficient, speed of cutting plate over 10 meters per minute
7, Non contact cut which means no marks or contamination of the material
8, Ability to cut virtually any sheet metal

SPECIFICATIONS:

Model	DPLC3015-500I	DPLC3015-1000I
Medium of laser	Semiconductor pump continuous ytterbium doped fiber
Laser wavelengthÂ	1070nm
Laser output power	500W	1000W
Cutting area(mm)(LÃ—W)Â Â Â Â Â Â	3000mmÃ—1500mm
Max cutting speed(m/min)Â	18 m/min	24Â m/min
Min line width	< 0.1mm	< 0.125mm
Cutting depthÂ	0.2mm---5mmÂ Â Â Â Â Â Â	0.2mm---8mm
Driving Way	Imported servo motor
Tranmission Way	Y-axis imported gear rack double driver,X-axis imported gear rack
Operational Temp Range	10 ~ 40ÂºC
Electrical Requirements	380V/50Hz.60Amp
Cooling Mode	WaterÂ cooled
Continuous working time	24 hours
Warranty:	2 years on laser source
Weight	About 3000kgÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Outline size(mm)Â Â Â Â Â Â Â	4270mmÃ—2420mmÃ—1750mmÂ Â (LÃ—WÃ—H)Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â

APPLICABLE MATERIALS:

Stainless steel, carbon steel, alloy steel, silicon steel, spring steel, aluminum, aluminum alloy, galvanized sheet and other metal pipes and tubes.
Â
APPLICABLEÂ INDUSTRY:

It is widely applied in industrial pipeline processing, explosion-proof equipment, military industry, chemical industry, oil exploration, lamps and lanterns, metal processing, ironware, building, etc.
2015 5mm wall thickness Laser Cutting Machine including shipping cost

DP FIBER LASER CUTTING ADVANTAGES:
1, Cost saving on power consumption/ only 20-30% of co2 laser cutting machine under same power.
2, Flexibility and precision cutting of simple or complex parts
3, Adopts imported world brand fiber laser/Life time over 100,000hrs
4, Imported servo motor and gearing system ensure precision cutting
5, High quality cut with no extra finishing required
6, Higher cutting speed and efficient, speed of cutting plate over 10 meters per minute
7, Non contact cut which means no marks or contamination of the material
8, Ability to cut virtually any sheet metal

SPECIFICATIONS:

Model	DPLC3015-500I	DPLC3015-1000I
Medium of laser	Semiconductor pump continuous ytterbium doped fiber
Laser wavelengthÂ	1070nm
Laser output power	500W	1000W
Cutting area(mm)(LÃ—W)Â Â Â Â Â Â	3000mmÃ—1500mm
Max cutting speed(m/min)Â	18 m/min	24Â m/min
Min line width	< 0.1mm	< 0.125mm
Cutting depthÂ	0.2mm---5mmÂ Â Â Â Â Â Â	0.2mm---8mm
Driving Way	Imported servo motor
Tranmission Way	Y-axis imported gear rack double driver,X-axis imported gear rack
Operational Temp Range	10 ~ 40ÂºC
Electrical Requirements	380V/50Hz.60Amp
Cooling Mode	WaterÂ cooled
Continuous working time	24 hours
Warranty:	2 years on laser source
Weight	About 3000kgÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Outline size(mm)Â Â Â Â Â Â Â	4270mmÃ—2420mmÃ—1750mmÂ Â (LÃ—WÃ—H)Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â

The Introduction of PCD

The PCD (Polycrystalline diamond) is a composite material, consisting of sintered diamond particles with a metallic binder. Diamond is the hardest material in absolute terms and therefore also the most resistant to abrasion. Used as a cutting tool, it has a good wear resistance, and a yield superior to traditional sharp carbide. The machined surface roughness with the PCD can reach comparable to the adjustment.

Main applications
â–²Processing of non-ferrous
â–²Aluminum alloys with high or low silicon content (pistons, engine blocks engine, wheels, carburetors, connecting rods, gear boxes, cylinders for brakes, etc.).
â–²Bronze and copper alloys (copper manifolds, engine bearings, bushings, connecting rods eyes, locations pumps etc.).
â–²Tungsten carbide (trafilatori rollers and other components sintered etc).
â–²Pieces composed of aluminum and lead, aluminum engine blocks with cast iron pipes reported
â–²Processing of non-metallic materials
â–²Very abrasive materials, such as ceramics industrial uncooked.
â–²Some fired ceramic: zirconia aluminum oxide, such as spark plugs and insulators.

â–²Glass, plastics with glass fibers, carbon fibers.

The Introduction of PCBN

PCBN has the characteristics of high thermal stability, high hardness, high wear resistance and. It`s inert to iron family element, hence PCBN is mainly used for the machining of high hardness and hard processed ferrous materials, such as d facing alloys, harden steel, pearlitic gray cast iron, high temperature alloy, high-speed steel, hard facing alloys, Ni-Cr alloy, powder metallurgy metals.

PCD/PCBN Series

Pcd/PCBN External Grooving Tool,PCD/PCBN Saw Blade,Solid CBN Insert,PCD & PCBN Insert

Henan Huanghe Whirlwind International Co., Ltd. , https://www.huangheindustry.com