GPS20 Water Well Drilling Machine

Model NO.: GPS20
Mining Object: Water Well
Trademark: RQ
Origin: China
GPS GPS-series engineering drill rig
GPS-series engineering drill rig is applied to large diameter cast-in-place piling with reinforced-concrete for high building, harbor, dam, bridge, basic engineering and also can drill large diameter hole of water well and engineering.
Features
This kind of rig is equipped a hydraulic device that can make can rotary and supporting plate to move away from the borehole.The mast is installed a guide way to the benefit of vertically of borehole and have a retraction system to move the kelly away from the center of rotary.It us equipped with a centrifugal mud pump system for pumping reverse circulation drilling to handle various conditions and formations and can be changed into direct circulation immediately to suit different needsTo life or lower mast is operated by hydraulic control quickly and reliablyMain and vice winches employ the mechanism of planetary-gear train, so the operation is simple and convenient.
Specifications Unit GPS-20
Drilling depth m 80
Diameter of hole m 2
Torque KN.M 30
Speed forward r/min 8.5,15,27,43,65
reverse 8
Main winch capacity (single rope) KN 30
Vice winch capacity (single rope) KN 30
Mud pump m3/h 180
Effective height m 10
Drill pipe mm  
Power kw 37
Weight T 10
Dimensions(LxWxH) m 5.6x2.4x25.2

Deep groove ball bearing:

     All bearings are essentially rolling devices that enable an object to move by reducing friction between that object and the surface it is moving over. The principle is that all objects taper Roller Bearing 1/8 inch 1 ball bearing are able to roll far better and faster than they slide. 

 

     Deep Groove Ball Bearings are suitable for high speed and even extremely high speed, and very durable, without constant maintenance.These bearing small friction coefficient, high limit speed, size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry.The main bearing is radial load, which can also bear a certain amount of axial load.

Deep Groove Ball Bearings

Deep Groove Ball Bearings,Miniature Ball Bearings,Small Ball Bearings,Pillow Block Bearings

ZHEJIANG XCC GROUP CO.,LTD. , https://www.xccbearing.com

Posted on