Flat roof structure for support.
The concentricity of shafts at both ends controlled in 15μm.
Patent no. of the sealing way of internal vacuum pipe: 200720001166.0.
The mounting bases of the motor and the speed reducer equipped with an adjustable structure.
Notes:
Different types of butterfly valve, such as rigidity seal and non-wear butterfly valve.
Application:
This dryer is suitable for granules & powders to be vacuum dried & mixed in pharmaceutical, foodstuff, chemical & other industrial lines. Especially suitable for the following requirements of the material:
1. The material unable to accept the high temperature.
2. The material is easily oxidized & dangerous.
3. The material needs to recycle the solvents and toxic gases.
4. The material requires a very low residual volatile matter content.
5. The material requires fully & uniformly mixing.
Technical Data:
Name | Unit | Model | |||||||||
Model | GSZG-Â 100 | GSZG- 200 | GSZG- 300 | GSZG- 500 | GSZG- 800 | GSZG- 1000 | GSZG- 2000 | GSZG- 3000 | GSZG- 4000 | GSZG- 5000 | |
Total Volume | L | 100 | 200 | 300 | 500 | 800 | 1000 | 2000 | 3000 | 4000 | 5000 |
Working Volume | L | 50 | 100 | 150 | 250 | 400 | 500 | 1000 | 1500 | 2000 | 2500 |
Heating Area | M2 | 1.16 | 1.5 | 2 | 2.63 | 3.5 | 4.61 | 7.5 | 10.2 | 12.1 | 14.1 |
Rotating Speed | Rpm | 6 | 5 | 4 | 4 | 4 | |||||
Power | KW | 1.5 | 2.2 | 2.2 | 3 | 4 | 4/5.5 | 5.5 | 7.5 | 11 | 15 |
Overall Size | Mm | 1800×720×1500 | 2000×800×1900 | 2200×900×2100 | 2500×1000×2400 | 2700×1200×3200 | 2800×1300×3200 | 3200×1800×3500 | 3800×2000×3600 | 4200×2200×4000 | 4350×2450×4950 |
Weight | Kg | 825 | 1050 | 1350 | 1650 | 1800 | 2070 | 3000 | 4500 | 5350 | 6000 |
Design Pressure inside the Cylinder | Mpa | -0.09~0.096 | |||||||||
Design pressure of Jacket | Mpa | 0.3 | |||||||||
The adjustable speed motor is optional according to buyer's requirement. Its speed is 0-6 rpm.                                                                   The maximal volume of cylinder can be designed to 10000L |
Company Profile:
Changzhou Aokai Drying Equipment Co., Ltd. was established in 2004, and is specialized in the design, manufacturing and development of the drying, calcination, cooling, crushing, mixing and granulating equipment.Â
The company has 4 modern standard workshops, about 13600 m2. There are 15 mid-level and senior engineers. It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories. The company can provide dryer, solutions and service according to GMP, cGMP and FDA certification.
The company has obtained the certification of "National High-Tech Enterprise", been the member of China Pharmaceutical Equipment Industry Association. Also, the company has passed ISO9001:2008 Quality Management System Certification, ISO14001:2004 Environmental Management System Certification and many other certificates as well as 20 more core technologies getting patent certificates.
For a long time, the company focuses on the scientific and technological innovation, always persists in the technology upgrading as the core, and takes the optimizing of the product structure as the development direction. The company has a professional technical team to cooperate with some scientific and research institutes to develop new products, absorbs and digests advanced technologies from China and overseas, continues to explore various patent technologies to widely used in the fields of chemical, pharmaceutical, foodstuff, pigments, new materials and military industries. Aokai has already stepped into the international market and established a good reputation.
With the development, the company has accumulated strong capital and technical strength, created an intelligent and harmonious team. The company has a pilot plant with many types of testing machine for customers to do test and select suitable models.
Aokai sincerely welcome the majority of insight to make great achievement together. Also warmly welcome to Aokai.
FAQ:
1. Q: Please describe your warranty period.
   A: 15 months after the equipment is arrived at the destination port or 12 months after  the installation and commissioning of the equipment, whichever comes first.
2. Q: Do you provide on-site installation and commissioning?
  A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.
3. Q: How about the cost of on-site installation and commissioning guidance?
   A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.
4. Q: Are you a factory or a trading company?
   A: We are a professional manufacturer. We have a pilot plant for customers to do sample testing.Â
Â
The bending machine is a machine capable of bending a thin plate. The structure mainly comprises a bracket, a worktable and a clamping plate. The worktable is placed on the bracket, the worktable is composed of a base and a pressure plate, and the base passes through the hinge and the clamping plate. Connected, the base is composed of a seat shell, a coil and a cover plate, and the coil is placed in the recess of the seat shell, and the top of the recess is covered with a cover plate. When in use, the coil is energized by the wire, and after the power is applied, the platen is attracted to the platen, thereby achieving the clamping of the plate between the platen and the base.
Our sheet metal bending machine can be profile custom,and are lower cost,high efficiency,reliable working ,low energy consumption.Any questions,please feel free to contact us.
Bending Machine And Cutting Machine
Plate Bending Machine,Sheet Bending Machine,Hydraulic Cutting Machine,Manual Cutting Machine
Cangzhou Feiyang Machiney Manufacturing Co., Ltd. , https://www.coldformingmachines.com