Operating the crusher six taboos

The crusher has certain procedures in daily operation. Only the reasonable use of the crusher can improve the use value of the crusher. Today, we will detail the six taboos of the daily operation of the crusher, as follows:

1. It is forbidden to operate without reading the instructions.

After the purchase, the equipment should carefully read the relevant instructions for the crusher, familiar with the use and maintenance of the crusher, and do not operate it yourself if you are not proficient, so as to avoid unnecessary accidents, it is best to be present by professionals. Our company will send professional and technical personnel to teach you the operation process until the church.

2. It is forbidden to use unqualified power supply

Use unqualified power supply, do not put more unburned electrodes, pay attention to electrode quality within a few minutes after lowering the electrode and lowering the electrode, try to move the electrode as little as possible or not move the motor, and take various measures to prevent the electrode from being broken. Handle immediately if a soft break occurs.

3. It is forbidden to operate in the machine.

Check the crushing chamber for ore or sputum before starting the work. Crusher allowed to start with a load, the load will start with a trip or cause electrical damage to machine parts, and therefore should be checked before driving the crushing chamber, if iron ore or blocks, to be cleared to start after.

4. It is forbidden to work without wearing personal protective equipment.

There will be noise and pollution when breaking things. This will cause great harm to our body in the long run. Therefore, we must pay attention to personal protective equipment before operation to reduce the damage to the crusher.

5, do not turn off the power when the power is off

Sudden power failure during use, remember to turn off the power, sudden calls will cause unnecessary damage. After the end of the work, you should also sort out the good things, turn off the power and leave, and develop a good habit of working.

6, prohibited to use only no maintenance

Maintenance is very important for the crusher. Long-term use will cause unnecessary wear on the machine. Therefore, check the wear level of the machine regularly, regularly maintain it, and regularly apply lubricant to make your machine play a bigger role.

Spare Parts

 

Goodsense Spare Parts advantages:

1.Quality and economic.

2.A wide range of spare parts,you can find anything you want in GOODSENSE.


Spare Parts

Spare Parts

Spare Parts

Spare Parts

Spare Parts


Application Area:

1.Every kinds of forklift.

 

If you have any other questions,please contact us directly.Our product are all with high quality.And we invite you to visit our factory.





Spare Parts

Spare Parts,Quality Forklift Parts,Goodsense Forklift Parts,Forklift Spare Parts

ZHEJIANG GOODSENSE FORKLIFT CO.,LTD , https://www.dieselforklift.nl

Posted on