Everyone knows that the amount of water used by a sprinkler is very large. In daily life, a lot of water is used almost daily. In fact, sprinklers can also achieve water conservation through some methods.
1. The self-priming height of the sprinkler pump itself will be higher than 5m, so that the sprinkler is suitable for field operations, and is also suitable for the extraction of clean water in the river within the city, which can save water resources.
2. The sprinkler car configuration is a national standard fire-fighting interface, which can be connected with the fire hydrants. Therefore, when planning the urban water supply pipe network, it is necessary to consider the replenishment point of the sprinkler, which can reduce water consumption and can also save the financial resources. pay expenses.
3. Do not sprinkle water when the road surface has not been cleaned. If the road is filled with silt or some debris, the watering operation will cause them to enter the sewer. Over time, the sewage pipeline will become blocked. During the rainy season, flooding may occur. On the other hand, it will also increase the cost of excavation of sewers. Therefore, it is best to sprinkle water after the street is cleaned.
4. When the customer purchases the sprinkler, it may have requested to increase the height of the rear spray nozzle. This will effectively expand the width of the sprinkler after the sprinkler, and even the single sprinkler can complete the sprinkler operation, resulting in more excellent dust and cooling effects.
5 , according to the actual needs of the sprinkler configuration increase, such as considering the practicality of sprinklers in the winter. The existing sprinkler can be retrofitted to increase the internal circulation of salt water spray function. In areas with cold climate, simple yet practical devices such as snowboard and ice-breaking hob can be added to the sprinkler to improve the sprinkler. The usage rate.
The above are some small tricks that Xiaobian has summarized for everyone to save water. Now that environmental protection water is a common topic for all, the world’s water resources are becoming less and less, and water for environmental protection is also a top priority. Start from scratch and start your own. Of course, sprinklers are the most used vehicles.
Electric hydraulic portable light weight portable volume small far-light screw steel hand-held Steel Bar Cutting Machine
The steel Bar Cutting Machine is a kind of tool used to shear steel bars.
There are automatic steel cutting machine and semi-automatic steel cutting machine.
It is one of the necessary equipment for steel rebar processing, and it is mainly used to cut off the length of rebar in buildings, Bridges, tunnels, power stations and large water conservancy projects.
Compared with other cutting equipment, steel bar cutting machine has the characteristics of light weight, low energy consumption, reliable operation and high efficiency.
There are automatic steel cutting machine and semi-automatic steel cutting machine.
The fully automatic cutting machine, also called electric cutting machine, is used to control the cutting knife incision through motor transformation into kinetic energy to achieve the effect of shearing steel.
While semi-automatic is manual control of the incision, so shear reinforcement operations.
And more should belong to hydraulic steel bar cutting machine bar cutting machine is divided into charging type and portable two categories.
Electric hydraulic steel bar cutting machine mainly consists of motor, hydraulic transmission system, control device, fixed blade and so on.
Working principle: the motor drives the eccentric shaft to rotate, the eccentric surface of the eccentric shaft to back and forth motion with the plunger in contact with it, so that the plunger pump produces high pressure oil into the cylinder body, drives the piston in the oil cylinder, drives the moving blade forward, and cuts off the steel bar by phase with the fixed blade fixed on the support.
The hydraulic system of manual hydraulic steel bar cutting machine is composed of piston, plunger, hydraulic cylinder, pressure lever, pin pulling, reset spring, oil storage barrel and drain and oil suction valve.
Portable Rebar Cutter,Rebar Cutter,Electric Rebar Cutter,Hydraulic Rebar Cutter
Shandong Luteng Building Equipment Co., Ltd. , https://www.lutengmachinery.com